Given the merits of photovoltaic technology (PV), rooftop PV systems are becoming more prevalent in residential and commercial areas. As a result of the growing number of photovoltaic systems connected to low voltage (LV) distribution grids, a significant portion of power flow from photovoltaic arrays to the LV grid, As the PV penetration increases, this effect becomes more severe. This reversal of power flow (from the load side to the grid side) results in a voltage rise problem along the distribution feeder. Such an issue is more pronounced near the point of common coupling (PCC). Overvoltages are not desired as they can damage consumers’ electronic devices, burn the insulation and can trip protective equipment, causing sudden power outages. The principal objective of this study is to achieve 100% PV penetration in a low voltage distribution network while maintaining voltages within the grid constraints by employing numerous voltage control techniques. To conduct PV penetration studies, the European low-voltage distribution benchmark network developed by CIGRE is selected. PV systems of various configurations are designed and integrated into the CIGRE LV network. The results of the PV penetration analysis on the CIGRE network suggest that with the increase in the distance between the source and the load, the penetration level decreases drastically. The worst-case network model in which the penetration level is reduced to 65% is selected for employing voltage control strategies. Two main strategies have been used to improve PV penetration. In the first category of methods, the reactive power is controlled by the PV system so that voltages at the PCCs are within the grid voltage limits. Four different reactive power control methods are employed. The second category of methods are based on active power control, in which the voltages are controlled by batteries/electrolyzers by absorbing excess power generated by the PV system, avoiding reverse power flow into the grid. The results obtained reveal that all the techniques employed are successful at increasing PV penetration to 100% without violating grid voltage limits. However, it is concluded that, batteries/electrolyzer systems provide better value in terms of effectiveness in solving the voltage rise issue. They also offers lower losses, and multiple-use cases.