The collapse of composite stiffened panels in compression is complex and involves the interactions of many different failure modes. However, when the panel is allowed to enter the post-buckling regime, skin-stringer separation due to the interaction of the post-buckling deformations with the skin-stringer interface is often the critical failure mode. The accurate prediction of skin-stringer separation in these types of panels is therefore crucial for their design. Due to the high computational costs associated with modelling damage in a large multistringer panel and the manufacturing and testing costs associated with testing such a panel, single stringer specimens that accurately represent the behaviour of critical regions in these panels have been proposed in literature. In this thesis, transversely loaded single stringer specimens are designed and verified and are used to predict skin-stringer separation in the critical regions of a specific multistringer panel. A specific composite stiffened panel is considered that contains a skin of a tape material and four co-cured stringers of a fabric material. At the intersections of the skin and stringers, resin-rich noodle regions are created. A buckling analysis is first performed on the panel to obtain its post-buckling deformations. Based on these, two types of regions where skin-stringer separation may occur are identified; a mode I dominated skin-stringer separation at the minima of the buckling waves and a combined mode II and mode III skin-stringer separation at the inflection points of the buckling waves. A seven point bending specimen is designed based on the panel deformations near the former critical region, while a four point twisting specimen is designed based on the deformations near the latter region. Finally, detailed damage models are set up for the single stringer specimens to predict skin-stringer separation and the models are verified with the multistringer panel. The analyses showed that a mode I dominated skin-stringer separation is critical for this panel. The detailed analysis of the four point twisting specimen showed that no damage occurred at the inflection point. To predict the skin-stringer separation at the minimum, a verified seven point bending specimen has successfully been obtained. To do so, it was important to accurately simulate the deformation of the skin at the stringer flange edge, since this proved to be driving for the initiation and propagation of skin-stringer separation. Next to that, a trilinear cohesive law was used to capture the R-curve effect in the tape/fabric interfaces. Finally, a first assessment of the noodle region behaviour showed that damage in this region will probably happen at the location of maximum bending. Recommendations for future research have been provided.

A short range hybrid electric aircraft capable of carrying 14 passengers from local (grass) airfields tomajor/commercial airports.