This article outlines key standardisation needs for specific topics related to molten salt reactors (MSR), namely measurements of thermo-physical properties, safety evaluation, qualification of fuels and fuel cycles, and codes & standards for materials and components. It also explores strategies for bridging gaps in international standardisation, harmonisation and collaboration, and raises the importance of building MSR prototypes and investing in testing facilities. This article is based on a survey and direct inputs from a Putting Science into Standards workshop held on 18 and 19 March 2024 and organised by the European Commissions’ Joint Research Centre (JRC) and European Committee for Standardization (CEN) and European Committee for Electrotechnical Standardization (CENELEC). The workshop gathered 100 experts from research, industry and policy making to discuss the development and standardisation of MSR technologies. By working together at European and international levels, standardisation will be a key instrument to enable the development and commercialisation of mature MSR technologies to support the European Union's goal of achieving fully functioning small modular reactors by 2030.

Carrier-selective passivating contacts have been demonstrated to be crucial to reach the practical efficiency limit of single junction, crystalline silicon (c-Si) based solar cells. Yet, the electrical transport losses affecting the collection of photogenerated carriers remain to be addressed. To this aim, different methodologies and characterization techniques are currently used. In this contribution, we propose the concept of shell as a new terminology to describe carrier-selective passivating contacts. Then, we present a novel characterization methodology using transfer length method (TLM) measurement under variable illumination to investigate the charge-carrier transport in amorphous/crystalline silicon heterojunction (SHJ) n-type contact stacks. We use technology computer-aided design simulation to model a TLM structure and to identify the physical phenomena and the key parameters affecting the contact resistivity (ρc) and the charge carrier accumulation of such contact stacks. Then, the simulation results are compared with experimental data by performing variable-illumination TLM measurements of actual SHJ n-type contact stacks. Specifically, we demonstrate that illumination has a strong impact on the measured ρc value, highlighting the importance of measuring ρc under maximum power point conditions for a relevant characterization of solar cell transport losses. In addition, we investigate the dependence of ρc to a change in the injected carrier density within the c-Si bulk to compare the illumination responses of different SHJ n-type contact stacks. In the quest for maximal efficiency, this method may insightfully complete other characterization techniques to further understand and study the electrical transport in solar cells.