Hybrid propulsion and using liquefied natural gas (LNG) as the alternative fuel have been applied on automobiles and some small ships, but research investigating the fuel consumption and emissions over the total voyage of ocean-going cargo ships with a hybrid propulsion and different fuels is limited. This paper tries to fill the knowledge gap by investigating the influence of the ship mission profile, propulsion modes and effects of different fuels on the fuel consumption and emissions of the ship over the whole voyage, including transit in open sea and manoeuvring in close-to-port areas. Results show that propulsion control and electric power generation modes have a notable influence on the ship's fuel consumption and emissions during the voyage. During close-to-port manoeuvres, propelling the ship in power-take-in (PTI) mode and generating the electric power by auxiliary engines rather than the main engine will reduce the local NOx and HC (hydrocarbons) emissions significantly. Sailing the ship on LNG will reduce the fuel consumption, CO2 and NOx emissions notably while producing higher HC emissions than traditional fuels. The hybridisation of the ship propulsion and using LNG together with ship voyage optimisation, considering the ship mission, ship operations and sea conditions, will improve the ship's fuel consumption and emissions over the whole voyage significantly.@en

Analysis of ship propulsion system performance is often performed using detailed hydrodynamic models to assess load changes, which are subsequently compared to static engine limits, or by detailed engine models that are rarely integrated with sufficiently detailed propulsion models for load change estimation. To investigate the dynamic engine (overloading) behaviour and ship propulsion performance under various heavy operating conditions, a Mean Value First Principle Parametric (MVFPP) engine model is integrated into a ship propulsion system model in this paper. An upgraded thermodynamic-based MVFPP model for two-stroke marine diesel engines is presented, in particular a newly developed MVFPP gas exchange model. Based on the integrated propulsion system model of a benchmark ocean-going chemical tanker, the engine dynamic behaviour during ship acceleration, deceleration and crash stop has been investigated. Results show that, during dynamic processes, the engine could be thermally overloaded even if the engine power trajectory is inside the static engine operating envelope. The paper contributes to finding proper indicators for thermal overloading of modern two-stroke marine diesel engines. It is demonstrated that when matching the engine with the propeller and designing the ship propulsion control system, not only the static engine operating envelope, but also the dynamic engine behaviour should be considered.@en

Current EEDI (Energy Efficiency Design Index) regulations striving to reduce the installed engine power on new ships for a low EEDI may lead to underpowered ships having insufficient power when operating in adverse sea conditions. In this paper, the operational safety of a low-powered ocean-going cargo ship operating in adverse sea conditions has been investigated using an integrated ship propulsion, manoeuvring and sea state model. The ship propulsion and manoeuvring performance, especially the dynamic engine behaviour, when the ship is sailing in heavy weather and turning into head sea, have been studied. According to the results, the dynamic engine behaviour should be considered when assessing the ship operational safety, as the static engine operating envelope is inadequate for the safety assessment. The impact of PTO/PTI (power-take-off/in) operation and changing propeller pitch on the ship thrust availability in adverse sea conditions have also been investigated. To protect the engine from mechanical and thermal overloading, compressor surge and over-speeding during dynamic ship operations and/or in high sea states, the engine and propeller should be carefully controlled. The paper shows that if in (heavy) adverse weather the propeller pitch can be reduced or if the shaft generator can work as a motor (PTI), more thrust can be developed which can significantly improve the operational safety of the ship.@en