SB
S. Brinkman
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
1 records found
1
Master thesis
(2023)
-
C.Q. van Alphen, R.B.J. Brinkgreve, K.G. Gavin, A. Tsouvalas, S. Brinkman, G. Chortis
This thesis describes the investigation of the lateral monopile response in weak rock and the effect of a zone of crushed rock that is induced by driven installation. The goal of the investigation is to study the impact of the weaker zone around a monopile on the lateral response. The thesis focuses on the modelling of a monopile in a finite element model to examine the effect. The modelled monopile is compared to field tests that were done in previous research to be able to benchmark the model. To full-fill the research objective several steps were taken. The research can be divided into four parts to get to the final conclusion, being a literature review and three different models that are set up. The goal of the literature review and the two model in 2D are to act as a basis for the setup and inputs of the 3D model. The 3D model can then assess the effect of a crushed zone on the lateral capacity and stiffness response of the pile.
...
...
This thesis describes the investigation of the lateral monopile response in weak rock and the effect of a zone of crushed rock that is induced by driven installation. The goal of the investigation is to study the impact of the weaker zone around a monopile on the lateral response. The thesis focuses on the modelling of a monopile in a finite element model to examine the effect. The modelled monopile is compared to field tests that were done in previous research to be able to benchmark the model. To full-fill the research objective several steps were taken. The research can be divided into four parts to get to the final conclusion, being a literature review and three different models that are set up. The goal of the literature review and the two model in 2D are to act as a basis for the setup and inputs of the 3D model. The 3D model can then assess the effect of a crushed zone on the lateral capacity and stiffness response of the pile.