Weigh-in-motion (WIM) systems help to collect data such as vehicular loads, individual axle loads, vehicle type, and number of axles. This is relevant in engineering because traffic load performs an essential function in the design of new bridges and in the reliability assessment of existing ones, in traffic analysis and other areas of engineering. Therefore, when WIM data is not available, computing synthetic WIM observations that adequately approximate the statistical dependence between variables is important. In this paper, WIM measurements from the Netherlands and Brazil were analysed, and a set of non-parametric Bayesian Networks (NPBNs) is presented. This paper significantly improves on previous results by allowing observations of inter-axial distance to be generated, by allowing several sources of data to be used in the modelling and by making software available to researchers and practitioners interested for generating synthetic observations based on the distribution of vehicle type. In particular, statistical models to describe the weight and length of different vehicle types are derived. Three NPBNs were quantified using data from: (i) six WIM locations of the motorway network of the Netherlands, (ii) one WIM location in one city route of Rotterdam, The Netherlands, and (iii) one WIM location of one highway in Araranguá city located in the south of Brazil. Additionally, a Graphical User Interface (GUI) for the six Dutch WIM motorways locations was developed. To illustrate a possible use of the model when WIM data is not available. The GUI was used to compute synthetic WIM observations using data collected through traffic counters gathered in Toluca city in central Mexico, as input. This paper shows that the methodology here presented is widely applicable and depends only on the assessment of vehicle type configuration.

@en

In the bridge industry, current traffic trends have increased the likelihood of having the simultaneous presence of both extreme live loads and earthquake events. To date, their concurrent interaction has scarcely been systematically studied. Prevailing studies have investigated the isolated existence of either live loads or seismic actions. In an effort to fill this gap in the literature, a non-parametric Bayesian Network (BN) has been proposed. It is aimed at evaluating the conditional probability of failure for a reinforced concrete bridge column, subject simultaneously to the actions mentioned above. Based on actual data from a structure located in the State of Mexico, a Monte Carlo Simulation model was developed. This led to the construction of a BN with 17 variables. The set of variables included in the model can be categorized into three groups: acting loads, materials resistances and structure force-displacement behavior. Practitioners are then provided with a tool for unspecialized labor force to gather information in situ (e.g. Weight-In-Motion data and Schmidt hammer measurements), which can be included in the network, leading to an updated probability of failure. Moreover, this framework also serves as a quantitative tool for bridge column reliability assessments. Results from the theoretical model confirmed that the bridge column probability of failure was within the expected range reported in the literature. This reflects not only the appropriateness of its design but also the suitability of the proposed BN for reliability analysis.@en