The electrochemical cycling mechanism of the ternary intermetallic TiSnSb, a promising conversion-type negative electrode material for lithium batteries, was thoroughly studied by operando X-ray absorption spectroscopy (XAS) at three different absorption edges, i.e., Ti, Sn, and Sb K-edge. Chemometric tools such as principal component analysis and multivariate curve resolution-alternating least squares were applied on the extensive data set to extract the maximum contained information in the whole set of operando data. The evolution of the near-edge (XANES) fingerprint and of the extended fine-structure (EXAFS) of the XAS spectra confirms the reversibility of the conversion mechanism, revealing that Ti forms metallic nanoparticles upon lithiation and binds back to both Sn and Sb upon the following delithiation. The formation of both Li7Sn2 and Li3Sb upon lithiation was also clearly confirmed. The application of chemometric tools allowed the identification of a time shift between the reaction processes of Sn and Sb lithiation, indicating that the two metals do not react at the same time, in spite of a certain overlap between their respective reaction. Furthermore, XANES and EXAFS fingerprint show that the Ti-Sn-Sb species formed after one complete lithiation/delithiation cycle is distinct from the starting material TiSnSb.@en

X-ray absorption and small-angle x-ray scattering spectra were simultaneously acquired under operando conditions in a joined technique approach, for the first time applied in the field of energy storage materials. This approach allows one to closely follow the electronic and local structure evolution, as well as monitor and quantify the morphological and nanostructural changes occurring during electrochemical cycling. Here we demonstrate its potential on the example of doped and non-doped Fe2O3 anode material vs. Li. Our results reveal that upon discharge Fe3+ is gradually reduced to the metallic state and segregated as nanoparticles. For the relithiation reaction, upon subsequent charge, we observe improved reversibility for the Sr-doped compared to non-doped and Ca-doped Fe2O3. We highlight that this combined technique approach is a reliable, facile and powerful tool to investigate electrode materials under realistic cycling condition. It provides an unbiased and holistic picture of the morphological and structural changes occurring during operation, which allows for adequate material tailoring.@en

To this day, elucidating the charge transfer process in electrode materials upon electrochemical cycling remains a challenge, primarily due to the complexity of chemical reactions at the electrode surfaces. Here, we present an elegant and reliable method to probe bulk-sensitive soft edges for elucidating anodic and cathodic charge compensation contribution via X-ray Raman scattering spectroscopy. By using a hard X-ray incident beam, this technique circumvents surface limitations and is practically free of self-absorption due to its nonresonant nature. In addition, it does not require complex sample preparation or experimental setups, making it an ideal tool for potential in situ analysis of the electronic structure of electrode materials. In this study, we monitored, for the first time, bulk soft edges of both oxygen and transition metal (iron) of the cathode material Li2FeSiO4 during one complete electrochemical cycle concurrently. Our results reveal that the redox mechanism relies primarily on the iron (cathodic) contribution. Nevertheless, a change in electron confinement of the oxygen suggests its active involvement in the charge compensation process (anodic). Moreover, we were able to support the experimentally observed changes in the electronic structure with ab initio-based simulation.@en