The following report will enlighten to which extent LiDAR data could enhance land cover classification. It focuses on the area Lemps (26510) in Southwest France where a land cover classification was made using Sentinel-2 spectral images during the fieldwork. Using the additional LiDAR data, the focus shifts to distinguish coniferous and deciduous trees. Training data from the LiDAR data has been selected in CloudCompare. Using the training data, features for coniferous and deciduous trees were extracted in python. The unique features were used as classifiers. Features based on the Intensity were found to be important. Based on the classifiers, two methods were used to classify the area. Random Forest and Nearest Neighbour were the classification methods. The classification using Random Forest was found to be more accurate. The Random Forest classification map has been compared with previously acquired Sentinel-2 classification maps. The Corine Land Cover Classification and the classification map from the fieldwork were compared to the classification of coniferous and deciduous trees using LiDAR. Lots of overlap was found with the Corine Land Cover, some overlap was present with the map acquired during the fieldwork. The map created during the fieldwork contained less training data, hence the model was not trained enough. If more training data is collected for both LiDAR and Sentinel- 2 classifications, LiDAR data could enhance the general land cover classification. Especially taking the intensity into account as a classifier.

The following report investigates the land ice height decrease of the Fleming Glacier between 2019 and 2022 using ICESat-2 satellite data. This glacier is located on the Antarctic Peninsula, an area that has been severely impacted by global warming. Using data from the Advanced Topographic Laser Altimeter System (ATLAS) on board ICESat-2, more specifically its ATL06 product, the average land ice heights in 2019 and 2022 could be compared. This was done with the aid of Python and the icepyx library, which allows for an easy extraction of the desired data from the NASA Eathdata website. The raw data had to be processed and filtered to eliminate the NaN values and reduce the noise. The resulting height measurements were then plotted and an average rate of land ice height decrease of 4.40 metres over the 3-year period was found, which corresponds to a 1.47 m/year decrease. The findings of this study indicate a slightly lower value compared to the results reported by Friedl et al. in their 1994-2016 study. However, this discrepancy is plausible, particularly considering the episode of increased ice melting observed in the Fleming Glacier after 2008, which can be attributed to the disintegration of the Wordie Ice Shelf. Crucially though, due to an issue with the Reference Ground Track overlap the amount of common data points found was just 27. This is insufficient to draw definitive conclusions regarding the overall melting of the entire Fleming Glacier. Future research, especially involving the use of the ATL11 product, is therefore recommended for this region.

Antarctica plays a crucial role in global climate change research, but current models only extend back to the satellite era from the 1990s to the present, leaving significant gaps in our understanding of the continent’s past and covering only limited locations. Historical aerial surveys, which may extend back to the 1930s and cover more locations, offer an opportunity to overcome these limitations. However, creating models from historical imagery poses a significant challenge. This study presents a workflow for automatically extracting camera altitude information from historical imagery and doing preliminary geolocalization by computing the footprints of the imagery based on the extracted altitude information. The workflow was applied to two flight lines in the TMA Single Frames dataset, and the results were evaluated using a scoring system and by comparing the photos with their footprints. This work serves as a preliminary stage in geolocating and georeferencing historical imagery, laying the foundation for future model-building with these photographs.

Historical aerial imagery serves as a valuable data source for observing Antarctica, facilitating an extended temporal scale of observation and enabling comparisons to deepen understanding of glacier dynamics. However, many historical aerial datasets, including the Antarctica Single Frames dataset utilized in this study, lack geo-referencing and orientation metadata essential for spatial analysis. One method of geo-referencing these historical images involves image matching to establish Ground Control Points (GCPs). This study focuses on the prerequisite for image matching: ensuring alignment between unreferenced historical images and already geo-referenced images in terms of scene and approximate resolution, a process termed 'geo-localization' herein. Geo-localization is achieved by comparing the historical image with positions within a predefined geo-referenced Area of Interest (AoI). Two predefined remote sensing datasets are used: Sentinel-2 and Quantarctica Rock Outcrop Mask, from which AoIs are generated. Positions within the AoI exhibiting the highest similarity to the historical image are likely to correspond to the same ground area, thus providing the location of the historical imagery. This similarity assessment employs two Siamese Networks: SigNet and ResNet-50. SigNet, originally designed for signature verification tasks, consists of four convolutional layers. In contrast, ResNet-50, initially developed for image classification purposes, is characterized by its deep architecture comprising approximately 50 convolutional layers, as suggested by its name. In this study, these two models are initially pre-trained on cross-domain datasets and subsequently adaptively trained with task-specific datasets created in this study. The adaptive training datasets comprise triplets of similar and dissimilar images pre-processed using methods devised in this study. An evaluation methodology based on confidence level is developed to assess the model and workflow performance, which is then applied to 51 test historical image samples. Overall, the results indicate that the ResNet-50 based network outperforms SigNet, achieving a 95.5% average confidence level. However, the method does not meet the initial expectation of directly providing the location of the historical image within the AoI. Instead, it identifies potential locations. Nevertheless, this outcome is valuable as it streamlines the search process for subsequent image matching steps. For instance, a 95.5% average confidence level for the ResNet-50 based network correlates with an approximate 95.5% reduction in processing time for geo-referencing when integrated with image matching in subsequent steps.