This paper describes the experiments performed at the National Laboratory for Civil Engineering (LNEC) aiming at simulating, in a flume, the wave propagation along a constant slope bottom that ends on a sea wall coastal defence structure, a common structure employed in the Portuguese coast. The objective of these tests is to calibrate the parameters of FUNWAVE, a Boussincsq type model, for wave propagation in coastal regions. This is the first step in the validation of a methodology to combine numerical and physical models in the study of the interactions between beaches and structures. This work is performed in the framework of the Composite Modelling of the Interactions between Beaches and Structures (CoMIBBs) project, a joint research activity of the HYDRALAB III European project.@en

A set of scale-model tests carried out to enlarge the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater's trunk armour and roundhead, is presented in this paper. A stretch of a rubble mound breakwater (head and part of the adjoining trunk, with a slope of 1(V):2(H)) was built in a wave basin at the Leibniz University Hannover to assess, under extreme wave conditions (wave steepness of 0.055) with different incident wave angles (from 40° to 90°), the structure behaviour in what concerns wave run-up, wave overtopping and damage progression of the armour layer. Two types of armour elements (rock and Antifer cubes) were tested. Non-intrusive methodologies including a new application of laser scanning technique for the assessment of both armour layer damage and wave run-up and overtopping were used. It is expected that such work will contribute also with data to improve empirical formulas as well as to validate complex numerical model for wave-structure interaction.@en

A set of scale-model tests was carried out at the wave basin of the Leibniz University Hannover to extend the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater’s trunk armour and roundhead. The paper describes the model set-up and operation concentrating on the measurement techniques used in those tests, namely on the innovative techniques for armour layer damage characterization. @en