Model-based manipulation of deformable objects has traditionally dealt with objects while neglecting their dynamics, thus mostly focusing on very lightweight objects at steady state. At the same time, soft robotic research has made considerable strides toward general modeling and control, despite soft robots and deformable objects being very similar from a mechanical standpoint. In this work, we leverage these recent results to develop a control-oriented, fully dynamic framework of slender deformable objects grasped at one end by a robotic manipulator. We introduce a dynamic model of this system using functional strain parameterizations and describe the manipulation challenge as a regulation control problem. This enables us to define a fully model-based control architecture, for which we can prove analytically closed-loop stability and provide sufficient conditions for steady state convergence to the desired state. The nature of this work is intended to be markedly experimental. We provide an extensive experimental validation of the proposed ideas, tasking a robot arm with controlling the distal end of six different cables, in a given planar position and orientation in space.

Currently, truss tomato weighing and packaging require significant manual work. The main obstacle to automation lies in the difficulty of developing a reliable robotic grasping system for already harvested trusses. We propose a method to grasp trusses that are stacked in a crate with considerable clutter, which is how they are commonly stored and transported after harvest. The method consists of a deep learning-based vision system to first identify the individual trusses in the crate and then determine a suitable grasping location on the stem. To this end, we have introduced a grasp pose ranking algorithm with online learning capabilities. After selecting the most promising grasp pose, the robot executes a pinch grasp without needing touch sensors or geometric models. Lab experiments with a robotic manipulator equipped with an eye-in-hand RGB-D camera showed a 100% clearance rate when tasked to pick all trusses from a pile. 93% of the trusses were successfully grasped on the first try, while the remaining 7% required more attempts.

Formulating the dynamics of continuously deformable objects and other mechanical systems analytically from first principles is an exceedingly challenging task, often impractical in real-world scenarios. What makes this challenge even harder to solve is that, usually, the object has not been observed previously, and the only information that we can get from it is a stream of RGB camera data. In this study, we explore the use of deep learning techniques to solve this nonlinear identification problem. We specifically focus on extracting dynamic models of simple deformable objects from the high-dimensional sensor input coming from an RGB camera. We investigate a two-stage approach to achieve this goal. First, we train a variational autoencoder to extract an extremely low-dimensional representation of the object configuration. Then, we learn a dynamic model that predicts the evolution of these latent space variables. The proposed architecture can accurately predict the object's state up to one second into the future.

This paper studies the tuning process of controllers for fully actuated manipulators. To this end, we propose a methodology to design the desired damping matrix—alternatively, the derivative gain of a PD controller—of the closed-loop system such that n second-order systems can approximate its behavior with a prescribed damping coefficient, where n denotes the degrees of freedom of the system. The proposed approach is based on the linearization of the closed-loop system around the desired configuration and is suitable for different control approaches, such as PD control plus gravity compensation, impedance control, and passivity-based control. Furthermore, we extensively analyze simulations and experimental results in a cobot.