Pit-in-pit (PIP) excavations in an aquifer–aquitard system likely undergo catastrophic failures under the hydraulic uplift, the associated undrained stability problem, however, has not been well analyzed in the past. To this end, a hypothetical model of PIP braced excavation in typical soil layers of Shanghai, China is developed using the finite element limit analysis (FELA) tool. The FELA solutions of safety factors (FSs) against hydraulic uplift are verified with the results from the finite element analysis with strength reduction technique (SRFEA) and existing design approaches. Subsequently, FELA is employed to identify the triggering and failure mechanisms of PIP braced excavations subjected to hydraulic uplift. A series of parametric studies considering the various geometric configurations of the PIP excavation, undrained shear strengths of aquitard, and artesian pressures are carried out. The sensitivities of relevant design parameters are further assessed using a multivariate adaptive regression splines (MARS) model that is capable of accurately capturing the nonlinear relationships between a set of input variables and output variables in multi-dimensions. A MARS-based design equation used for predicting FS is finally presented using the artificial dataset from FELA for practical design uses.@en

Large-diameter monopiles are widely used as the foundation to support offshore wind turbines (OWTs) in shallow coastal waters. The benefits of small-to-medium diameter tapered piles have been reported in the past. The potential use of large-diameter tapered monopiles installed by impact driving to support OWTs is thus presented, and then comparatively assessed by numerical analyses in terms of energy balance and installation mechanisms. A three-dimensional large deformation finite element (3D-LDFE) model of monopiles driven in clay was developed using a Coupled Eulerian-Lagrangian (CEL) approach. An advanced user-defined hypoplasticity clay (HC) model was employed to model undrained kaolin clay, featuring nonlinear behavior from small strain to large strain. The force-time curve defined by the operating data of a state-of-the-art hammer in the offshore industry was inputted to explicitly model impact driving. Better agreement between the measured and the simulated results was observed to validate the accuracy of the numerical model. The numerical results obtained give greater confidence to the future use of large diameter tapered monopiles for OWTs.@en

This study presents a hybrid framework to predict stability solutions of buried structures under active trapdoor conditions in natural clays with anisotropy and heterogeneity by combining physics-based and data-driven modeling. Finite-element limit analysis (FELA) with a newly developed anisotropic undrained shear (AUS) failure criterion is used to identify the underlying active failure mechanisms as well as to develop a numerical (physics-based) database of stability numbers for both planar and circular trapdoors. Practical considerations are given for natural clays to three linearly increasing shear strengths in compression, extension, and direct simple shear in the AUS material model. The obtained numerical solutions are compared and validated with published solutions in the literature. A multivariate adaptive regression splines (MARS) algorithm is further utilized to learn the numerical solutions to act as fast FELA data-driven surrogates for stability evaluation. The current MARS-based modeling provides both relative importance index and accurate design equations that can be used with confidence by practitioners.@en