In existing wind farms, the overall power output can be increased through yaw control. However, the cooperative control of start/stop, yaw and turbines positions is often overlooked, leading to wake superposition to downstream wind turbines and suboptimal power output. This paper proposes a synchronized optimized method that considers start/stop, yaw and turbines positions control based on a three-dimensional wake model and yaw flow superposition model. The objective function of the proposed strategy is to maximize the power output of the Chapman Ranch (CR) wind farm. Four cases are considered: start-stop, yaw control, start-stop & yaw control and start-stop & yaw & turbines positions control. The particle swarm algorithm is introduced to optimize the wind farm layout. According to the results, considering start-stop, yaw and turbines positions optimization can not only increase the annual power output of the wind farm by 8.85 %, but also avoid the colliding wake in the CR wind farm. However, the other three cases will cause colliding wake in some fields of the CR wind farm. This study provides important guidance on improving the overall power output of existing wind farms.@en

This paper presents an experimental investigation on the dynamic mechanical performance of S30408 austenitic stainless steel (ASS) under elevated temperatures, which is essential for determining the behaviour of structures made with this type of steel subjected to the coupled fire and impact/explosion. For this purpose, the quasi-static and dynamic compression tests using Split Hopkinson Pressure Bar (SHPB) were conducted under temperatures of 20–600 °C and strain rates from 0.001 to 3000 s−1. In addition, the corresponding microstructures of tested samples were observed. The stress–strain responses, strain rate and temperature effects as well as the microstructural evolutions were analyzed. Test results show that the stress–strain responses are sensitive to the strain rate and temperature. The strain-rate sensitivity coefficient increases as the strain rate and temperature rise. The microstructural observation reveals that the grain dimension declines with an increment of strain rate or a decreasing temperature. Finally, the dynamic compressive stress–strain models for S30408 ASS under 20–600 °C were suggested on the basis of the Johnson-Cook (J-C) model and have been proved to give a reasonable prediction.@en

As the main way for the long-distance transportation of refined products, multi-products pipelines are of vital importance to the regional energy security. The supply reliability evaluation of multi-product pipeline systems can improve the effective response to unexpected disruptions and guarantee the reliable oil supply. Based on reliability theory and pipeline scheduling method, an integrated supply reliability evaluation methodology for multi-product pipeline systems is proposed in this paper and the pumps failure, of which influence is the most complex, is focused on. In the methodology, the discrete-time Markov process is adopted to describe the stochastic failure and the Monte Carlo method is used to simulate the system states transition. With the pipeline flowrate upper limits under various pumps failure scenarios optimized in advance, the maximum supply capacity to the downstream markets in each trial is calculated by the pipeline scheduling model. Three indicators are also developed to analyze the pipeline supply reliability from the holistic and individual perspectives. At last, the methodology application is performed on a real-world multi-product pipeline system in China and the supply reliability is analyzed in detail according to the simulation results. It is proved to provide a practical method for the emergency response decision-making and loss prevention.@en