A series of laboratory experiments focused on the wind impact on the vertical turbulence structure in shallow water has been carried out. The turbulence characteristics in the mid-lower water column under relatively strong wave conditions are investigated. For different experimental conditions (i.e., waves only, wind only, combinations of wind and waves) in a wind-wave flume, the effects of wind and waves were investigated in detail by decomposing the total energy into different terms (i.e., wind-driven currents, wind waves, wind-induced turbulence). The results show that shallow water waves play a major role in transferring energy by non-zero wave-induced Reynolds stress (u˜w˜‾), turbulent diffusion (u^′w^′‾). The superimposed wind can further modify the energy transference due to its impact on wave asymmetry and skewness as well as through homogenizing the time-average velocity profiles. Subsequently, the impact of wind on turbulence structure was explored in detail. The most important finding is that the wind can directly influence water turbulent diffusion (u^′w^′‾) along with wave-induced turbulence. The vertical turbulence intensity (σ_w) is more sensitive to wind than the horizontal turbulence intensity (σ_u). Furthermore, the major way that wind affects water turbulence is by introducing nonlinear wind and wave interactions, which exhibit a maximum effect (∼60 % compared to the respective effect of wind and wave) at the edge of the bottom boundary layer. This study demonstrates that the wind can transfer momentum downward to mid-lower water columns even under strong waves in shallow waters, which differs from that in deep water systems.

The erosion threshold, beyond which bed sediments start to move, is a key parameter describing sediment transport processes. For silt-dominated mixtures, in which the grain size is between sand and clay, existing experimental studies exhibit contradictory observations. That is, the erosion was either sand-like or clay-like, suggesting transitional erosion behavior. To explore the underlying mechanism of the transitional erosion behavior of silt-sized sediment, we revisited the topic of the erosion threshold of sand-silt mixtures by carrying out a series of erosion experiments for different bed compositions. The results suggest that there exists a critical silt content of approximately 35%, separating two domains. Below this critical value, the critical bed shear stress follows the Shields criterion, whereas above this value, the erosion threshold of a mixed bed increases abruptly and remains relatively constant with a further increase in silt content. By combining with existing data, we found that the proposed critical silt content acts as a tipping point, beyond which the mixed bed shifts from a sand-dominated to a silt-dominated domain. For the silt-dominated domain, a stable silt skeleton can be formed by attraction forces that resist erosion. However, the attraction forces are too weak to form a stable silt skeleton when the silt content is too small. Based on this finding, a modified critical bed shear stress formula is proposed for silt-dominated mixtures, which results in a better agreement with experimental data (an averaged bias of 10%), performing better than existing formulas (larger than 30%).

Tidal currents belong to the main driving forces shaping the bathymetry of marginal seas. A globally unique radial sand ridge field exists in the South Yellow Sea off the central Jiangsu coast, China. Its formation is related to the distinctive “radial tidal current” pattern at that location. A generally accepted hypothesis is that the “radial tidal current” is a consequence of the interference between the northern amphidromic tidal wave system and the southern incoming tidal wave. In this study, a schematized numerical tidal model was designed to investigate the tidal current system and the factors of influence in the South Yellow Sea. Concepts of the tidal current amphidromic point (CAP) and the tidal current inclination angle are utilized to analyze the inherent structure of the tidal current system. By conducting a series of numerical experiments, it is found that the Poincaré modes are necessary for the existence of “radial tidal current,” and the e-folding decay length should be smaller than the basin length. In the Yellow Sea, cross-basin phase differences due to lateral depth differences as well as open boundary conditions favor the emergence of the “radial tidal current.” Further analyses indicate that the CAP system (i.e., the co-inclination lines, the CAPs, and the tidal ellipticity) deepens the understanding on the dynamic structure of a tidal current system, and therefore, it deserves more attention in future studies.

Coastal vegetation is efficient in damping incident waves even in storm events, thus providing valuable protections to coastal communities. However, large uncertainties lie in determining vegetation drag coefficients (C_D), which are directly related to the wave damping capacity of a certain vegetated area. One major uncertainty is related to the different methods used in deriving C_D. Currently, two methods are available, i.e. the conventional calibration approach and the new direct measurement approach. Comparative studies of these two methods are lacking to reveal their respective strengths and reduce the uncertainty. Additional uncertainty stems from the dependence of C_D on flow conditions (i.e. wave-only or wave-current) and indicative parameters, i.e. Reynolds number (Re) and Keulegan-Carpenter number (KC). Recent studies have obtained C_D-Re relations for combined wave-current flows, whereas C_D-KC relations in such flow condition remain unexplored. Thus, this study conducts a thorough comparison between two existing methods and explores the C_D-KC relations in combined wave-current flows. By a unique revisiting procedure, we show that C_D derived by the direct measurement approach have a better overall performance in reproducing both acting force and the resulting wave dissipation. Therefore, a generic C_D-KC relation for both wave-only and wave-current flows is proposed using direct measurement approach. Finally, a detailed comparison of these two approaches are given. The comprehensive method comparison and the obtained new C_D-KC relation may lead to improved understanding and modelling of wave-vegetation interaction.