A full petrographic and petrophysical characterization of tight sandstones has been conducted as part of ongoing study of Carbon Dioxide Enhanced Oil and Gas Recovery (CO₂-EOR/EGR) and CO₂sequestration. The main purpose of this study is to give novel perception into the interplay of the rock characteristics and fluid flow in tight formations, which are candidates for EOR/EGR processes (macroscopic sweep vs. microscopic displacement efficiency). To achieve this, several experimental techniques, including routine core analysis, X-ray diffraction (XRD), X-ray fluorescence (XRF), thin sections petrography, Scanning Electron Microscopy (SEM) and capillarity/pore size distributions by using Mercury Injection Capillary Pressure (MICP), Nuclear Magnetic Resonance (NMR), and Micro-Computed Tomography (Micro-CT), were conducted. Three tight sandstone rock samples (Bandera, Kentucky, and Scioto) were used in this work and particular attention was paid to the impact of clay content on rock's pore system and other petrophysical characteristics and hence fluids flow during production process. Results indicate that the presence of fibrous illite clay acting as pore bridging in Bandera and Kentucky samples have blocked the overall micro-pore system causing a significant reduction in the micro-pore throat system to 36% in Bandera sand and 50.9% in Kentucky sample. On the other hand, absence of fibrous illite and the presence of illite platelets in the Scioto sandstone led to a clear preservation of the sample's micro-pore throat attributing to a total of 59.1% of the total pore throat system. A new dimensionless number (dimensionless micro-pore throat modality) was established, defined as the ratio of micro-to macro-pore sizes. This shows that Scioto has the highest value of 1.44 implying that both macro- and micro-pore systems contribute to flow. Therefore, the mitigation of oil bypass from smaller pores should be a key criterion in selecting the proper recovery methods. Results show the effect of clay mineralogy on pore system considering a part of the physical and spatial properties the pore/grain framework of the tight sandstones.

Macro-, meso-, micro-pore systems combined with clay content are critical for fluid flow behavior in tight sandstone formations. This study investigates the impact of clay mineralogy on pore systems in tight rocks. Three outcrop samples were selected based on their comparative petrophysical parameters (Bandera, Kentucky, and Scioto). Our experiments carried out to study the impact of clay content on micro-pore systems in tight sandstone reservoirs involve the following techniques: Routine core analysis (RCA), to estimate the main petrophysical parameters such as porosity and permeability, X-ray diffraction (XRD), and scanning electron microscopy (SEM) to assess mineralogy and elemental composition, Mercury Injection Capillary Pressure (MICP), Nuclear Magnetic Resonance (NMR), and Micro-Computed Tomography (Micro-CT) to analyze pore size distributions. Clay structure results show the presence of booklets of kaolinite and platelets to filamentous shapes of illite. The Scioto sample exhibits a micro-pore system with an average pore body size of 12.6±0.6 μm and an average pore throat size of 0.25±0.19 μm. In Bandera and Kentucky samples illite shows pore-bridging clay filling with an average mineral size of around 0.25±0.03 μm, which reduces the micro-pore throat system sizes. In addition, pore-filling kaolinite minerals with a diameter of 5.1±0.21 μm, also reduce the micro-pore body sizes. This study qualifies and quantifies the relationship of clay content with primary petrophysical properties of three tight sandstones. The results help to advance procedures for planning oil recovery and CO₂ sequestration in tight sandstone reservoirs.