JV
J.H. Visser
info
Please Note
<p>This page displays the records of the person named above and is not linked to a unique person identifier. This record may need to be merged to a profile.</p>
4 records found
1
Conference paper
(2020)
-
Amir Ghaderi, L.M. Middelburg, David Bilby, J.H. Visser, Per Lundgren, Peter Enoksson, R.F. Wolffenbuttel
Exhaust gas measurement in the harsh environment of the tailpipe of a combustion engine by optical techniques is a highly robust technique, provided that optical access is maintained in the presence of particulate matter (PM). The considerations are presented for the systematic design of membranes with integrated heaters in SiC-on-Si technology for generating a well-defined lateral temperature profile with peak temperatures above 600 °C. Periodically raising the temperature of the membranes to such a level is demonstrated to keep the surface transparent by oxidation of soot deposits. This paper is about continuous heating of the membrane to a temperature slightly higher than that of the exhaust gas. At such temperatures thermophoretic repulsion of PM allows allows long-term optical measurement in the exhaust without the thermo-mechanical loading by repetitive thermal cycling.
...
Exhaust gas measurement in the harsh environment of the tailpipe of a combustion engine by optical techniques is a highly robust technique, provided that optical access is maintained in the presence of particulate matter (PM). The considerations are presented for the systematic design of membranes with integrated heaters in SiC-on-Si technology for generating a well-defined lateral temperature profile with peak temperatures above 600 °C. Periodically raising the temperature of the membranes to such a level is demonstrated to keep the surface transparent by oxidation of soot deposits. This paper is about continuous heating of the membrane to a temperature slightly higher than that of the exhaust gas. At such temperatures thermophoretic repulsion of PM allows allows long-term optical measurement in the exhaust without the thermo-mechanical loading by repetitive thermal cycling.
The resistive particulate matter sensor is a simple device that transduces the presence of soot through impedance change across inter-digital electrodes (IDEs). We investigate the information provided by impedance spectroscopy over the frequency range from 100 Hz to 10 kHz for two purposes. The first is to investigate the opportunities for an improved sensor response to particulate matter (PM), based on the additional information provided by the measurement of both the in-phase (resistive) and out-of-phase (capacitive) components of the change in impedance over this frequency range as compared to DC resistance measurement only. Secondly, the origin of the capacitive response of the device is investigated from the perspective that soot on the device is in the form of bendable dendrites that grow in three dimensions. An IDE structure with the housing acting as an additional suspended electrode for introducing a controllable vertical electric field component has been used for this purpose. The formation of dipoles, due to bending of the charged dendrites, is found to be the source of the capacitive response. Simulation of electrostatic soot deposition reinforces dendritic self-assembly mechanisms, driven by charged particle trajectories along electric field lines. Optical microscopy confirms that dendrites growing out of the substrate plane are sensitive to electric and flow forces, bending when force balances are appropriate. We also apply impedance spectroscopy under varying electric field strengths, showing that capacitive response is only observed when conditions are conducive to dendrite bending in response to the applied AC electric fields.
...
The resistive particulate matter sensor is a simple device that transduces the presence of soot through impedance change across inter-digital electrodes (IDEs). We investigate the information provided by impedance spectroscopy over the frequency range from 100 Hz to 10 kHz for two purposes. The first is to investigate the opportunities for an improved sensor response to particulate matter (PM), based on the additional information provided by the measurement of both the in-phase (resistive) and out-of-phase (capacitive) components of the change in impedance over this frequency range as compared to DC resistance measurement only. Secondly, the origin of the capacitive response of the device is investigated from the perspective that soot on the device is in the form of bendable dendrites that grow in three dimensions. An IDE structure with the housing acting as an additional suspended electrode for introducing a controllable vertical electric field component has been used for this purpose. The formation of dipoles, due to bending of the charged dendrites, is found to be the source of the capacitive response. Simulation of electrostatic soot deposition reinforces dendritic self-assembly mechanisms, driven by charged particle trajectories along electric field lines. Optical microscopy confirms that dendrites growing out of the substrate plane are sensitive to electric and flow forces, bending when force balances are appropriate. We also apply impedance spectroscopy under varying electric field strengths, showing that capacitive response is only observed when conditions are conducive to dendrite bending in response to the applied AC electric fields.
Conference paper
(2020)
-
L.M. Middelburg, Mohammadamir Ghaderi, David Bilby, J.H. Visser, Kouchi Zhang, R.F. Wolffenbuttel
Impedance spectroscopy in the frequency range 100 Hz to 10 kHz has been applied to the Inter-Digitated Electrode (IDE) structure that is conventionally operated as a resistive sensor for the measurement of Particulate Matter (PM). The measurement of both the in-phase (resistive) and out-of-phase (capacitive) components of the impedance over this frequency range provides more data on PM as compared to DC resistance measurement only. Experimental validation confirms a more gradual change in capacitance with soot buildup as compared to the sudden reduction of resistance with dendrite formation. The effect of an additional vertical electric field for an increased capacitive sensitivity due to stimulated soot buildup has been experimentally investigated using the electrically conductive flow housing of the IDE structure as an additional suspended electrode.
...
Impedance spectroscopy in the frequency range 100 Hz to 10 kHz has been applied to the Inter-Digitated Electrode (IDE) structure that is conventionally operated as a resistive sensor for the measurement of Particulate Matter (PM). The measurement of both the in-phase (resistive) and out-of-phase (capacitive) components of the impedance over this frequency range provides more data on PM as compared to DC resistance measurement only. Experimental validation confirms a more gradual change in capacitance with soot buildup as compared to the sudden reduction of resistance with dendrite formation. The effect of an additional vertical electric field for an increased capacitive sensitivity due to stimulated soot buildup has been experimentally investigated using the electrically conductive flow housing of the IDE structure as an additional suspended electrode.
Journal article
(2016)
-
L.M. Middelburg, G. de Graaf, M. Ghaderi, A. Bossche, J. Bastemeijer, J.H. Visser, R.E. Soltis, R.F. Wolffenbuttel
The optical absorption of water-containing bio-fuel is investigated as a parameter to determine the gasoline content of this fuel. Optical measurements reveal that gasoline shows an interesting and useful spectrum with typical absorption behavior in the UV range between 230 and 300 nm. This result indicates that significant information can be obtained to determine the gasoline concentration in bio-fuel by UV absorption spectroscopy. A concept for a low-cost measurement system in the fuel line is presented, by implementing a LVOF in combination with a wide-band light source and detector arrays.
...
The optical absorption of water-containing bio-fuel is investigated as a parameter to determine the gasoline content of this fuel. Optical measurements reveal that gasoline shows an interesting and useful spectrum with typical absorption behavior in the UV range between 230 and 300 nm. This result indicates that significant information can be obtained to determine the gasoline concentration in bio-fuel by UV absorption spectroscopy. A concept for a low-cost measurement system in the fuel line is presented, by implementing a LVOF in combination with a wide-band light source and detector arrays.