In this report, the design process of a high precision positioning system for Ghana is described. The system consists of two devices, a base station and a user operated rover. These devices provide precision positioning, using dual frequency receivers and the principle of differential positioning. The high precision positioning system can be utilized for multiple purposes. The system can open up business opportunities in surveying, can be used to make height maps for flood prediction and to gather meteorological data. The gathering of weather data is the main purpose of TWIGA, under which flag this project runs.
During this project, the main focus is to create a working product, which can be tested in Ghana as soon a possible. Therefore, the highest priority is to make a functional device in terms of accurate positioning, data connection and power supply. This device should be suitable for the local environmental conditions, such as tropical rain and a high humidity.

Under urban sprawl the trend of new established complex structures has rapidly increased. In this context little importance has been given to maintenance, even if this represents an important step in combating and avoiding disasters and developing improved future structural designs. Over the last years low-cost Global Navigation Satellite System (GNSS) equipment has faced rapid and important development opening a new door to reliable and high accuracy positioning applications such as structural health monitoring (SHM). This study focuses on assessing, from a geodetic perspective, the capabilities of a pair of low-cost dual frequency GNSS receivers for capturing the kinematic response of structures to wind. An experiment has been carried out with a stainless steel cantilever beam, aiming to highlight the advantages of employing a differential GNSS system for monitoring low frequency changes in the structure’s body. Hence, in this context the nominal precision of the GNSS system in East, North and Up direction of 4, 5 and 10 millimeter (1σ), was further improved to 3, 4 and 8 miilimeters in the presence of a Global Positioning System (GPS) based multipath (MP) correction. However, it is safer to consider that the true displacement retention potential of the low-cost GNSS receivers corresponds to 3 times (3σ) the aforementioned standard deviation values, resulting in slightly larger than 1 centimeter detectable horizontal displacements, and up to 2.4 centimeters vertical displacements. To support this, wind-induced beam displacements of up to 1.9 centimeters were identified and attested based on a cross correlation analysis with meteorological information. Next, the architecture of a GNSS based SHM system is proposed that can detect structural displacements in real time and rise safety alarms. Therefore, with real time kinematic (RTK) differential positioning and a position outlier and slip statistical testing procedure, a clear strategy for the estimation and identification of uni- or tri-dimensional displacement quantities in real time is proposed, to rise alarms about the magnitude and the direction of identified displacements. Hence, there is no doubt that newly released low-cost dual frequency GNSS receivers represent an alternative to high-end geodetic equipment for SHM, by offering an optimal balance between precision and cost efficiency.