In this thesis, a test device is designed for the company Momo Medical. Momo Medical is developing a system that can be used to prevent pressure ulcers and adding more functionality is being investigated. For this system they need a device to test the functionality of the six piezoelectric sensors that are used in their product. The sensors’ response to a known pulse needs to be tested in order to give a pass/fail indication of the sensor quality. First, different ways of testing the sensors are investigated. Based on the results of the investigation, a final test setup is chosen and characterized. The test system developed in this thesis is based on a pneumatic setup, using a solenoid valve to control well-defined air pulses directed towards the sensors. Due to the addition of a reference load cell with custom designed read-out electronics, the device is able to test all six sensors one at the time and provides detailed feedback about the individual sensor quality. The test is performed using GUI-based software written in MATLAB, connected to a microcontroller. The software offers a broad variety of settings and can be configured according to Momo Medical’s wishes. After configuration, the test can be performed at the click of a button. The standard deviation of the device precision over three hours is sigma = 4.16, which equals a variation of cv = 0.82% of the mean μ = 504.8. This easily satisfies the requirements set byMomoMedical.

The founders of Momo Medical envisioned a health care product that would help nurses worldwide with pressure ulcer prevention. Pressure ulcers are a chronic wound that affects the skin of patients who do not regularly change bed posture. As it currently stands, nurses lack the manpower and time to change the postureof patients in a timely manor. Thus, a goal was set to create a product that would reduce this strain on nurses.The goal was to design a non-intrusive product that keeps track of the posture of a patient on a hospital bed, and send an alarm if this has not changed in a set amount of time. A constraint with this was that the product has to lay directly underneath the mattress of the patient. Furthermore, the product has to make use of as few sensors as possible. With these constrains, the project group was divided in three subgroups: the sensor, the algorithm, and the testing subgroup.This report will focus on the design, implementation, and evaluation of the algorithm. The algorithm has to be designed to process the sensor data and return, with 90% accuracy, the posture of the patient. It also has to be able to determine with 99% accuracy whether or not there is a patient on the bed. An optional objective was to design an algorithm to determine the heart and respiration rate of the patient, with 80% accuracy, but this was of lower priority. It was soon decided to give priority to posture detection and not further investigate detection of the heart and respiration rate.In the final product, the information about the patient’s posture will be displayed in a graphical user interface (GUI). This GUI has to be user-friendly and intuitive to use by the nurses. During the prototyping phase, however, a different GUI was used, one that displayed various debugging information. This prototype GUI was necessary to test the various algorithms.Several different mathematical models have been investigated, implemented, and tested. These models range from taking the variance of the sensor data, to deploying a Fourier transform on a polynomial curve based on the sensor data. With preliminary test data, an accuracy of 93% was achieved using a neural network. With the final testing data however, only the neural network reached the required accuracy of 90%, though only just, at 90.8%. With future iterations of the algorithm, more research and data collection is advised, as neural networks work better with larger data sets.