Memory advances have not kept up with computing demands. Emerging device technology Resistive RAM (RRAM) addresses this by enabling computation-in-memory. However, RRAM suffers from read disturb, limiting viability. While earlier work has had some success in reducing read disturb by switching the read current direction (a bipolar read scheme), the RRAM device eventually degraded. In this work, a reinforcing bipolar read scheme is introduced, which aims to prevent read disturb by reinforcing both HRS and LRS, away from the undefined state. From device-level simulation, this reinforcing behaviour is predicted for V = 0.5, 0.4 and 0.3 V with a fixed switching ratio between time under positive and negative read voltage polarity rsw i tch = 2.5, 2.5 and 2.75, respectively. At V = 0.2 V and V = 0.1 V, it is predicted that no reinforcement scheme exists. The bipolar read scheme found for V = 0.5 V was evaluated in circuit simulation with a sense amplifier. however the HRS and LRS reinforcing behaviour found at device-level could not be replicated. From unipolar read results at circuit level, it was determined no switching ratio exists that reinforces both the HRS and LRS state boundaries as chosen here at RHRS,min = 12.8kΩ and RLRS,max = 4.4kΩ for V = 0.5 V. However, a 5.1x reduction in resistance drift compared to conventional unipolar read was still obtained.

The founders of Momo Medical envisioned a health care product that would help nurses worldwide with pressure ulcer prevention. Pressure ulcers are a chronic wound that affects the skin of patients who do not regularly change bed posture. As it currently stands, nurses lack the manpower and time to change the postureof patients in a timely manor. Thus, a goal was set to create a product that would reduce this strain on nurses.The goal was to design a non-intrusive product that keeps track of the posture of a patient on a hospital bed, and send an alarm if this has not changed in a set amount of time. A constraint with this was that the product has to lay directly underneath the mattress of the patient. Furthermore, the product has to make use of as few sensors as possible. With these constrains, the project group was divided in three subgroups: the sensor, the algorithm, and the testing subgroup.This report will focus on the design, implementation, and evaluation of the algorithm. The algorithm has to be designed to process the sensor data and return, with 90% accuracy, the posture of the patient. It also has to be able to determine with 99% accuracy whether or not there is a patient on the bed. An optional objective was to design an algorithm to determine the heart and respiration rate of the patient, with 80% accuracy, but this was of lower priority. It was soon decided to give priority to posture detection and not further investigate detection of the heart and respiration rate.In the final product, the information about the patient’s posture will be displayed in a graphical user interface (GUI). This GUI has to be user-friendly and intuitive to use by the nurses. During the prototyping phase, however, a different GUI was used, one that displayed various debugging information. This prototype GUI was necessary to test the various algorithms.Several different mathematical models have been investigated, implemented, and tested. These models range from taking the variance of the sensor data, to deploying a Fourier transform on a polynomial curve based on the sensor data. With preliminary test data, an accuracy of 93% was achieved using a neural network. With the final testing data however, only the neural network reached the required accuracy of 90%, though only just, at 90.8%. With future iterations of the algorithm, more research and data collection is advised, as neural networks work better with larger data sets.