31.2 A 0.9V 28MHz Dual-RC Frequency Reference with 5pJ/Cycle and ±200 ppm Inaccuracy from -40°C to 85°C
Woojun Choi (Yonsei University)
J. Angevare (TU Delft - Electronic Instrumentation)
Injun Park (Yonsei University)
K. Makinwa (TU Delft - Microelectronics)
Youngcheol Chae (Yonsei University)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
Wireless sensor nodes in battery-powered internet-of-things (loT)
applications require a stable on-chip frequency reference with low
energy (<10 pJ / cycle) and high frequency stability (below ±300ppm).
CMOS RC frequency references are promising due to their low-cost
integration and high energy efficiency [1] –[5]. Conventional RC
references, however, achieve only moderate accuracy (a few %) due to the
large temperature coefficient (TC) of on-chip resistors [3].
First-order TC compensation can be achieved by combining resistors with
complementary TCs [1], [2]. Although this is energy efficient (<6 pJ /
cycle), it only partially compensates for the resistors’ high-order
TCs, limiting the resulting accuracy to about ±500 ppm. Better accuracy (±100
ppm [4]) can be achieved by using the output of a digital temperature
sensor (TS) to perform a polynomial correction of the phase-shift (μp,T) of an RC filter (Fig. 31.2.1). Alternatively, the phase-shifts (μp. and μN) of two RC filters with complementary TCs can be linearized (Tp. and T
N
) and combined in the digital domain. Such dual-RC frequency references can also achieve good accuracy (±200 ppm [5]). However, both architectures employ an analog phase-domain ΔΣ modulator (Φ−ΔΣM) for each RC filter, which consumes significant energy (25pJ/cycle [4] and 107pJ/ cycle [5]) and area (0.3mm2[4]. and 1.65mm2[5]).