A 0.9-V 28-MHz Highly Digital CMOS Dual-RC Frequency Reference With ±200 ppm Inaccuracy From -40 °C to 85 °C
Woojun Choi (ETH Zürich)
Jan A. Angevare (TU Delft - Electronic Instrumentation)
Injun Park (Samsung Electronics Company Ltd.)
Kofi A.A. Kofi (TU Delft - Microelectronics)
Youngcheol Chae (Yonsei University)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This article presents an energy-efficient dual- RC frequency reference intended for wireless sensor nodes. It consists of a digital frequency-locked loop (FLL) in which the frequency of a digitally controlled oscillator (DCO) is locked to a temperature-independent phase shift derived from two different RC poly-phase filters (PPFs). Phase shifts with complementary temperature coefficients (TCs) are generated by using PPFs made from different resistor types (p-poly and silicided p-poly). The phase shift of each filter is determined by a zero-crossing (ZC) detector and then digitized by a digital phase-domain ΔΣ modulator ( Φ - ΔΣM ). The results are then combined in the digital domain via fixed polynomials to produce a temperature-independent phase shift. This highly digital architecture enables the use of a sub-1-V supply voltage and enhances energy and area efficiency. The 28-MHz frequency reference occupies 0.06 mm2 in a 65-nm CMOS process. It achieves a period jitter of 7 ps ( 1σ ) and draws 142 μW from a 0.9-V supply, which corresponds to an energy consumption of 5 pJ/cycle. Furthermore, it achieves ±200 ppm inaccuracy from −40∘C to 85 ∘C after a two-point trim.