Current detection using a Josephson parametric upconverter
Felix Schmidt (Kavli institute of nanoscience Delft, TU Delft - QN/Steele Lab)
Daniel Bothner (TU Delft - QN/Steele Lab, Kavli institute of nanoscience Delft)
I. C. Corveira Rodrigues (Kavli institute of nanoscience Delft, TU Delft - QN/Steele Lab)
Mario Gely (TU Delft - QN/Steele Lab, Kavli institute of nanoscience Delft)
M.D. Jenkins Sanchez (Kavli institute of nanoscience Delft, TU Delft - QN/Steele Lab)
G.A. Steele (Kavli institute of nanoscience Delft, TU Delft - QN/Steele Lab)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
We present the design, measurement, and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity. When a coplanar waveguide is terminated with a nanobridge-constriction Josephson junction, we observe modulation sidebands from the cavity that enable highly sensitive frequency-multiplexed output of small currents for applications such as readout of transition-edge sensor arrays. We derive an analytical model to reproduce the measurements over a wide range of bias current, detuning, and input power. When the frequency of the cavity is tuned by more than 100 MHz with a dc current, our device achieves a minimum current sensitivity of 8.9pA/Hz. Extrapolating the results of our analytical model, we predict an improved device based on our platform, capable of achieving a sensitivity down to 50fA/Hz, or even lower if one can take advantage of parametric amplification in the Josephson cavity. Taking advantage of the Josephson architecture, our approach can provide higher sensitivity than kinetic inductance designs, and potentially enables detection of currents ultimately limited by quantum noise.