Quantum control of electromagnetic fields was initially established in the optical domain and has been advanced to lower frequencies in the gigahertz range during the past decades extending quantum photonics to broader frequency regimes. In standard cryogenic systems, however, thermal decoherence prevents access to the quantum regime for photon frequencies below the gigahertz domain. Here, we engineer two superconducting LC circuits coupled by a photon-pressure interaction and demonstrate sideband cooling of a hot radio frequency (RF) circuit using a microwave cavity. Because of a substantially increased coupling strength, we obtain a large single-photon quantum cooperativity q0 ∼ 1 and reduce the thermal RF occupancy by 75% with less than one pump photon. For larger pump powers, the coupling rate exceeds the RF thermal decoherence rate by a factor of 3, and the RF circuit is cooled into the quantum ground state. Our results lay the foundation for RF quantum photonics.

We present the design, measurement, and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity. When a coplanar waveguide is terminated with a nanobridge-constriction Josephson junction, we observe modulation sidebands from the cavity that enable highly sensitive frequency-multiplexed output of small currents for applications such as readout of transition-edge sensor arrays. We derive an analytical model to reproduce the measurements over a wide range of bias current, detuning, and input power. When the frequency of the cavity is tuned by more than 100 MHz with a dc current, our device achieves a minimum current sensitivity of 8.9pA/Hz. Extrapolating the results of our analytical model, we predict an improved device based on our platform, capable of achieving a sensitivity down to 50fA/Hz, or even lower if one can take advantage of parametric amplification in the Josephson cavity. Taking advantage of the Josephson architecture, our approach can provide higher sensitivity than kinetic inductance designs, and potentially enables detection of currents ultimately limited by quantum noise.

The field of optomechanics has emerged as leading platform for achieving quantum control of macroscopic mechanical objects. Implementations of microwave optomechanics to date have coupled microwave photons to mechanical resonators using a moving capacitance. While simple and effective, the capacitive scheme suffers from limitations on the maximum achievable coupling strength. Here, we experimentally implement a fundamentally different approach: flux-mediated optomechanical coupling. In this scheme, mechanical displacements modulate the flux in a superconducting quantum interference device (SQUID) that forms the inductor of a microwave resonant circuit. We demonstrate that this flux-mediated coupling can be tuned in situ by the magnetic flux in the SQUID, enabling nanosecond flux tuning of the optomechanical coupling. Furthermore, we observe linear scaling of the single-photon coupling rate with the in-plane magnetic transduction field, a trend with the potential to overcome the limits of capacitive optomechanics, opening the door for a new generation of groundbreaking optomechanical experiments.