A Fully Integrated Adaptive-MPP-Shifting Rectifier for Piezoelectric Energy Harvesting Outputting 580μW at 10V-VOC

Conference Paper (2025)
Author(s)

Xinling Yue (TU Delft - Electrical Engineering, Mathematics and Computer Science)

Wenyu Peng (TU Delft - Electrical Engineering, Mathematics and Computer Science)

Sijun Du (TU Delft - Electrical Engineering, Mathematics and Computer Science)

Research Group
Electronic Components, Technology and Materials
DOI related publication
https://doi.org/10.1109/CICC63670.2025.10983131 Final published version
More Info
expand_more
Publication Year
2025
Language
English
Research Group
Electronic Components, Technology and Materials
Publisher
IEEE
ISBN (electronic)
9798331517458
Event
45th Annual IEEE Custom Integrated Circuits Conference, CICC 2025 (2025-04-13 - 2025-04-16), Boston, United States
Page Views
67
Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Abstract

Piezoelectric energy harvesting (PEH) has become a promising alternative to conventional batteries for powering wireless sensors and edge computing devices. Among various rectifier topologies for PEH, synchronized bias-flip rectifiers, such as parallel synchronized switch harvesting on inductor (SSHI) [1] and capacitors (SSHC) rectifiers [2], have garnered significant attention in recent years due to their higher output power if the optimal output voltage is reached. A typical structure of a bias-flip rectifier and its output power related to the rectifier's output voltage (VREC) are shown in Fig. 1 (left). As the VREC changes, a distinctive peak power exists, signifying the maximum power point (MPP) [3]-[5]. At this point, VREC is at its optimal value, expressed by VMPP= Voc/(1-qF). Voc is the open circuit voltage amplitude of a piezoelectric transducer (PT), typically between 1 V and 10V under most real-world excitation levels, and η F is the flipping efficiency of a bias-flip rectifier. To track and maintain the rectifier's output power at the MPP, an MPPT (Maximum Power Point Tracking) block is needed after the rectifier to regulate VREC. While most prior designs have been mainly focused on increasing η F, usually over 60%, for greater output power [6]-[16], the theoretical VMPP can easily go higher than the breakdown voltage (5V) of standard CMOS devices if VOC is higher than 2V. As a result, the reachable MPP still stays at 5V to protect the chip, with a much lower output power than the theoretical MPP. Though LDMOS devices allow VREC to track higher VMPP, the resulting high VREC introduces high-voltage pressures and large voltage step-down ratios for the following power-conditioning stages. This has been an unsolved challenge limiting the output power of all CMOS bias-flip rectifiers since it was first introduced at ISSCC'2009 [1].

Files

A_Fully_Integrated_Adaptive-MP... (pdf)
(pdf | 1.1 Mb)
- Embargo expired in 19-11-2025
– Personal use only – Dutch Copyright Act (Article 25fa)