An IF-to-baseband sigma delta modulator for AM/FM/IBOC radio receivers with a 118 dB dynamic range

Journal article (2007)

Authors

PGR Silva Electronic Instrumentation -

K.A.A. Makinwa Electronic Instrumentation -

J.H. Huijsing Electronic Instrumentation -

LJ Breems Electronic Instrumentation -

R Roovers External organisation

Research Group

Electronic Instrumentation () (TU Delft)

More Info

expand_more

To reference this document use:

http://resolver.tudelft.nl/uuid:dfc15ee9-ff4e-423e-8b0e-32594a5e772f

Published Date

2007

Language

Undefined/Unknown

Reuse Rights

Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.

Faculty

Electrical Engineering, Mathematics and Computer Science

Department

Microelectronics

Research Group

Electronic Instrumentation

Abstract

A single-bit fifth-order complex continuous-time IF-to-baseband SigmaDelta modulator for AM/FM/IBOC receivers is presented. The input IF is 10.7 MHz and the sampling frequency is 41.7 MHz. The modulator achieves a dynamic range of 118dB in AM mode (3 kHz BW), 98dB in FM mode (200 kHz BW), and 86dB in IBOC mode (500 kHz BW). The modulator's high dynamic range enables the realization of an AM radio receiver without a VGA and without an AM channel-selection filter, thereby reducing system complexity and cost. The elimination of the VGA also improves the sensitivity and the overall noise figure of the receiver. The modulator's spurious free dynamic range is 88 dB in the bandwidth from 25 to 525 kHz. The IM2 distance is 92 dB, and the IM3 distance is 91 dB. The ADC was fabricated in a one-poly five-metal 0.18-mum CMOS process with an active area of 6.0mm2. It consumes 210 mW from a 1.8-V supply