A Variable-Gain Low-Noise Transimpedance Amplifier for Miniature Ultrasound Probes
Eunchul Kang (TU Delft - Electronic Instrumentation)
Mingliang Tan (TU Delft - Electronic Instrumentation)
Jae Sung An (TU Delft - Electronic Instrumentation)
Zu Yao Chang (TU Delft - Electronic Instrumentation)
Philippe Vince (Advanced Research group)
Nicolas Sénégond (Advanced Research group)
Tony Mateo (Advanced Research group)
Cyril Meynier (Advanced Research group)
Michiel A.P. Pertijs (TU Delft - Electronic Instrumentation)
More Info
expand_more
Other than for strictly personal use, it is not permitted to download, forward or distribute the text or part of it, without the consent of the author(s) and/or copyright holder(s), unless the work is under an open content license such as Creative Commons.
Abstract
This article presents a low-noise transimpedance amplifier (TIA) designed for miniature ultrasound probes. It provides continuously variable gain to compensate for the time-dependent attenuation of the received echo signal. This time-gain compensation (TGC) compresses the echo-signal dynamic range (DR) while avoiding imaging artifacts associated with discrete gain steps. Embedding the TGC function in the TIA reduces the output DR, saving power compared to prior solutions that apply TGC after the low-noise amplifier. The TIA employs a capacitive ladder feedback network and a current-steering circuit to obtain a linear-in-dB gain range of 37 dB. A variable-gain loop amplifier based on current-reuse stages maintains constant bandwidth in a power-efficient manner. The TIA has been integrated in a 64-channel ultrasound transceiver application-specific integrated circuit (ASIC) in a 180-nm BCDMOS process and occupies a die area of 0.12 mm2. It achieves a gain error below ±1 dB and a 1.7 pA/ √ Hz noise floor and consumes 5.2 mW from a ±0.9 V supply. B-mode images of a tissue-mimicking phantom are presented that show the benefits of the TGC scheme.