Searched for: +
(1 - 20 of 658)

Pages

document
de Haan, Pim (author), Mulder, Jean Paul S.H. (author), Lötters, J.C. (author), Verpoorte, Elisabeth (author)
Stable delivery of liquids to microfluidic systems is essential for their reproducible functioning, especially when supplying flows to organs-on-chips – delicate living models that recreate human physiology on the microscale and thus can be used to reduce the need for animal testing. Most flow control systems are unable to sustain a robust...
journal article 2024
document
Mulder, Sebastiaan (author), Klein, S.A. (author)
To support increasing renewable capacity for a net-zero future, energy storage will play a key role in maintaining grid stability. In this paper, all current and near-future energy storage technologies are compared for three different scenarios: (1) fixed electricity buy-in price, (2) market-based electricity buy-in price, and (3) energy storage...
journal article 2024
document
Mulder, W.A. (author), Shamasundar, R. (author)
Dispersion error analysis can help to assess the performance of finite-element discretizations of the wave equation. Although less general than the convergence estimates offered by standard finite-element error analysis, it can provide more detailed insight as well as practical guidelines in terms of the number of elements per wavelength needed...
journal article 2024
document
Mulder, W.A. (author), Kuvshinov, B. (author)
The accuracy of a model obtained by full-waveform inversion can be estimated by analysing the sensitivity of the data to perturbations of the model parameters in selected subsurface points. Each perturbation requires the computation of the seismic response in the form of Born scattering data for a typically very large number of shots, making the...
conference paper 2024
document
Versteeg, Rogier (author), Pool, D.M. (author), Mulder, Max (author)
This article discusses a long short-term memory (LSTM) recurrent neural network that uses raw time-domain data obtained in compensatory tracking tasks as input features for classifying (the adaptation of) human manual control with single- and double-integrator controlled element dynamics. Data from two different experiments were used to train...
journal article 2024
document
Veldhuis, Robbin (author), Mulder, Max (author), van Paassen, M.M. (author)
Understanding human perception of haptic feedback is critical when designing and regulating these interfaces. In recent years, experiments have been conducted to determine the just-noticeable difference (JND) in mass-spring-damper dynamics, using a hydraulic admittance display in the form of a side-stick. These experiments have resulted in a...
journal article 2024
document
Andreadis, Georgios (author), Mulder, Joas I. (author), Bouter, P.A. (author), Bosman, P.A.N. (author), Alderliesten, T. (author)
The transformation model is an essential component of any deformable image registration approach. It provides a representation of physical deformations between images, thereby defining the range and realism of registrations that can be found. Two types of transformation models have emerged as popular choices: B-spline models and mesh models....
conference paper 2024
document
van Leeuwen, J.K. (author), Landman, H.M. (author), Groen, Eric L. (author), Mumaw, Randall J. (author), Stroosma, O. (author), van Paassen, M.M. (author), Mulder, Max (author)
Previous research indicated a need to improve pilot training with regard to understanding of autopilot logic and behavior, especially in non-routine situations. Therefore, we tested the effect of problem-based exploratory training on pilots’ understanding of autopilot functions. Using a moving-base flight simulator, general aviation pilots (n...
journal article 2024
document
Mulder, W.A. (author)
To estimate the depth errors in a subsurface model obtained from the inversion of seismic data, the stationary-phase approximation in a two-dimensional constant-velocity model with a dipped reflector is applied to migration with a time-shift extension. This produces two asymptotic solutions: one is a straight line, and the other is a curve....
journal article 2024
document
Karanth, P. (author), Weijers, M.J. (author), Ombrini, P. (author), Ripepi, D. (author), Ooms, F.G.B. (author), Mulder, F.M. (author)
Increasing the electrode thickness, thereby reducing the proportion of inactive cell components, is one way to achieve higher-energy-density lithium-ion batteries. This, however, results in higher electronic and ionic overpotentials and/or mechanical failure induced by binder migration. Here, we report ethanol-induced phase inversion as an...
journal article 2024
document
Mulder, J.T. (author)
doctoral thesis 2023
document
Ripepi, D. (author), Schreuders, H. (author), Mulder, F.M. (author)
Ammonia is an indispensable commodity and a potential carbon free energy carrier. The use of H permeable electrodes to synthesize ammonia from N <sub>2</sub>, water and electricity, provides a promising alternative to the fossil fuel based Haber-Bosch process. Here, H permeable Ni electrodes are investigated in the operating temperature range...
journal article 2023
document
Masuda, Ryosuke (author), Hashimoto, Y. (author), Mulder, Max (author), van Paassen, M.M. (author), Kano, Manabu (author)
Accurate process control through automation is the key to achieving efficient and stable operation of a blast furnace. In this study, we developed an automatic control system of hot metal temperature (HMT). To cope with the slow and complex process dynamics of the blast furnace, we constructed a control algorithm that predicts eight-hour...
journal article 2023
document
Mulder, W.A. (author)
Finite elements with mass lumping allow for explicit time stepping when modelling wave propagation and can be more efficient than finite differences in complex geological settings. In two dimensions on quadrilaterals, spectral elements are the obvious choice. Triangles offer more flexibility for meshing, but the construction of polynomial...
journal article 2023
document
Cazacu, Silvia (author), Mulder, I. (author), Vande Moere, Andrew (author), Steenberghen, Thérèse (author)
Data-driven domains such as public administration, health or mobility have adopted a so-called 'data ecosystem' perspective to unify the socio-technical aspects fostering data-driven collaboration. While a data ecosystem is technically able to collect and merge their different datasets, it is yet relatively unable to facilitate meaningful...
conference paper 2023
document
Arush, I. (author), Pavel, M.D. (author), Mulder, Max (author)
Evaluation of the power required in level flight is essential to any new or modified helicopter performance flight-testing effort. The conventional flight-test method is based on an overly simplification of the induced and profile power components required for a helicopter in level flight. This simplistic approach incorporates several...
journal article 2023
document
Mulder, G. (author), van Leijen, F.J. (author), Hanssen, R.F. (author)
The observed phase in time series of interferometric synthetic aperture radar (InSAR) products is a superposition of various components. Differential topography, line-of-sight displacements, and differential atmospheric delays are the main contributions and need to be disentangled to derive accurate digital elevation model (DEM), deformation,...
journal article 2023
document
Mulder, J.T. (author), Jenkinson, Kellie (author), Toso, Stefano (author), Prato, Mirko (author), Evers, W.H. (author), Bals, Sara (author), Manna, Liberato (author), Houtepen, A.J. (author)
Lanthanide-doped LiYF4 (Ln:YLF) is commonly used for a broad variety of optical applications, such as lasing, photon upconversion and optical refrigeration. When synthesized as nanocrystals (NCs), this material is also of interest for biological applications and fundamental physical studies. Until now, it was unclear how Ln:YLF NCs grow from...
journal article 2023
document
Wei, Z. (author), Mulder, J.T. (author), Dubey, R. (author), Evers, W.H. (author), Jager, W.F. (author), Houtepen, A.J. (author), Grozema, F.C. (author)
Understanding the interplay between the kinetics and energetics of photophysical processes in perovskite-chromophore hybrid systems is crucial for realizing their potential in optoelectronics, photocatalysis, and light-harvesting applications. By combining steady-state optical characterizations and transient absorption spectroscopy, we have...
journal article 2023
document
Izelaar, B. (author), Ripepi, D. (author), van Noordenne, D.D. (author), Jungbacker, M.P. (author), Kortlever, R. (author), Mulder, F.M. (author)
journal article 2023
Searched for: +
(1 - 20 of 658)

Pages