Searched for: +
(61 - 80 of 237)

Pages

document
Wo, Kah Jen (author), Avis, G. (author), Rozpędek, Filip (author), Mor-Ruiz, Maria Flors (author), Pieplow, Gregor (author), Schröder, Tim (author), Jiang, Liang (author), Sørensen, Anders S. (author), Borregaard, J. (author)
One-way quantum repeaters where loss and operational errors are counteracted by quantum error-correcting codes can ensure fast and reliable qubit transmission in quantum networks. It is crucial that the resource requirements of such repeaters, for example, the number of qubits per repeater node and the complexity of the quantum error...
journal article 2023
document
Chen, Wei (author), Jiang, Jing (author), Meda, Abdulmelik H. (author), Ibrahim, Mesfin S. (author), Zhang, Kouchi (author), Fan, J. (author)
SiC MOSFET is mainly characterized by the higher electric breakdown field, higher thermal conductivity, and lower switching loss enabling high breakdown voltage, high-temperature operation, and high switching frequency. However, their performances are considerably limited by the high parasitic inductance and poor heat dissipation capabilities...
journal article 2023
document
Liu, Shurui (author), Lu, T. (author), Tang, Z. (author), Chen, Zhiyuan (author), Jiang, Junmin (author), Zhao, Bo (author), Du, S. (author)
In this article, we propose a reconfigurable regulating rectifier with a wide operational range for wireless power transfer. The proposed three-mode rectifier achieves a broad range voltage regulation without global loop control to minimize the chip area occupation. Compared with previous work, more working modes and greater voltage gain...
journal article 2023
document
Bennour, Ali (author), Jia, Li (author), Menenti, M. (author), Zheng, Chaolei (author), Zeng, Yelong (author), Barnieh, Beatrice Asenso (author), Jiang, Min (author)
Study region: Senegal river (SRB), Niger river (NRB), and Lake Chad basins (LCB). Study focus: We investigated the impacts of land use/land cover change (LULC) and climate variability on the water balance components from 1990 to 2020. We applied the Soil and Water Assessment Tool (SWAT) coupled with remote sensing retrievals of actual...
journal article 2023
document
Jiang, Jing (author), Chen, Wei (author), Qian, Yichen (author), Meda, Abdulmelik H. (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
Considerable advancements in power semiconductor devices have resulted in such devices being increasingly adopted in applications of energy generation, conversion, and transmission. Hence, we proposed a fan-out panel-level packaging (FOPLP) design for 30-V Si-based metal-oxide-semiconductor field-effect transistor (MOSFET). To achieve...
journal article 2023
document
Guo, Z. (author), Qiu, Jingping (author), Jiang, Haiqiang (author), Zhu, Qiang (author), Wang Kwek, Jin (author), Ke, Lin (author), Qu, Zhengyao (author)
The fresh superfine-tailings cemented paste backfill (SCPB) exhibits strong thixotropy, but quantification of the resulting transient flow (non-steady state) and time-dependent yield stress is lacking. In this study, a simple qualitative model was developed to describe the transient flow and time-dependent yield stress of SCPB. The effect of...
journal article 2023
document
Yuan, Xiangyang (author), Cui, Endian (author), Liu, K. (author), Jiang, Ying (author), Yang, Xiaoyan (author), Tang, Jianfeng (author), Yang, Lu (author), Liao, Xiaoling (author), Zhao, Yanan (author)
In this work, different lanthanides (Tm<sup>3+</sup>, Er<sup>3+</sup>; Yb<sup>3+</sup>, Ho<sup>3+</sup>, Nd<sup>3+</sup>) were doped into NaYF<sub>4</sub> via a high-temperature coprecipitation method, and followed by SiO<sub>2</sub> coating to improve the water dispersibility, resulting in NaYF<sub>4</sub>:Tm<sup>3+</sup>, Er<sup>3+</sup>...
journal article 2022
document
Li, Wei (author), Yi, Liming (author), Jiang, Wen (author), Dong, H. (author), Zhang, Yong (author)
This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...
journal article 2022
document
Ghorbanpour, S. (author), Deshmukh, Kaustubh (author), Sahu, Saswat (author), Riemslag, A.C. (author), Reinton, T.E. (author), Borisov, Evgenii (author), Jiang, Quanxin (author), Terol Sanchez, M. (author), Knezevic, Marko (author), Popovich, V. (author)
This paper addresses the effect of the post-process heat treatments on the microstructure and fatigue crack growth behaviour of the functionally graded (FG) laser powder bed fusion (L-PBF) Inconel 718 (IN718) superalloy. Sets of samples were additively manufactured (AM) altering the process parameters, namely the laser power, the laser...
journal article 2022
document
Cai, Jie (author), Jiang, X. (author), Yang, Yazhou (author), Lodewijks, Gabriel (author), Wang, Minchang (author)
A corrosion defect is recognized as one of the most severe phenomena for high-pressure pipelines, especially those served for a long time. Finite-element method and empirical formulas are thereby used for the strength prediction of such pipes with corrosion. However, it is time-consuming for finite-element method and there is a limited...
journal article 2022
document
Jiang, Xi (author), Zhang, X. (author), Wang, Shuai (author), Bai, Yun (author), Huang, Baoshan (author)
Pipe jacking has been the dominant trenchless technology for constructing small (\2 m) to medium-diameter (\4 m) tunnels. Uncertainties and construction difficulties increase significantly when the diameter of the tunnel exceeds 4 m. This paper presents a case study of the largest concrete pipe-jacking tunnel project in the world, the...
journal article 2022
document
He, X. (author), Jiang, C. (author), Li, L. (author), Blom, H.A.P. (author)
UAS-based commercial services such as urban parcel delivery are expected to grow in the upcoming years and may lead to a large volume of UAS operations in urban areas. These flights may pose safety risks to persons and property on the ground, which are referred to as third-party risks. Path-planning methods have been developed to generate a...
journal article 2022
document
Jiang, Min (author), Jia, Li (author), Menenti, M. (author), Zeng, Yelong (author)
The region-wide spatial pattern of the drivers of vegetation trends in the African Sahel-Sudano-Guinean region, one of the main drylands of the world, has not been fully investigated. Time-series satellite earth observation datasets were used to investigate spatiotemporal patterns of the vegetation greenness changes in the region and then a...
journal article 2022
document
Wang, Q. (author), Zietzschmann, F.E. (author), Hofman-Caris, Roberta (author), Jiang, N. (author), Schuster, Jonas (author), Wang, Zheng (author), Yu, Jianwei (author), Yang, Min (author), Rietveld, L.C. (author)
It was widely acknowledged that dissolved organic matter (DOM) in natural water has ubiquitous competitiveness against organic micropollutants (OMPs) during adsorption onto activated carbon. However, some (model) low molecular weight organics have been reported to adsorb onto activated carbon, but were not competitive against co-adsorbates....
journal article 2022
document
Ekka, A. (author), Keshav, Saket (author), Pande, S. (author), van der Zaag, P. (author), Jiang, Yong (author)
Study region: Upper Cauvery river basin, India Study focus: Reservoir construction is one of the major contributors to changes in natural river flow regime characteristics. This study aims to understand the hydrological alterations resulting from the construction of reservoirs and water abstraction in the upper regions of the basin. The...
journal article 2022
document
Hou, Shuhan (author), Wang, Zhaokun (author), Yang, Huiru (author), Jiang, Jing (author), Gao, Chenshan (author), Liu, Yufei (author), Tang, Xiaosheng (author), Ye, H. (author)
For the relevant properties of pristine and doped (Si, P, Se, Te, As) monolayer WS<sub>2</sub> before and after the adsorption of CO, CO<sub>2</sub>, N<sub>2</sub>, NO, NO<sub>2</sub> and O<sub>2</sub>, density functional theory (DFT) calculations are made. Calculation results reveal that the monolayer WS<sub>2</sub> doped with P and As atoms...
journal article 2022
document
Lu, Jing (author), Jia, Li (author), Zhou, Jie (author), Jiang, Min (author), Zhong, Yulong (author), Menenti, M. (author)
A drought-induced water storage deficit index (D-WSDI) is proposed to quantify the response of GRACE-based terrestrial water storage change to meteorological drought and the impact of drought on water storage deficit. D-WSDI is defined as the normalized residual component of GRACE time-series data after removing the long-term trend and...
journal article 2022
document
Zang, Y. (author), Qian, Yong (author), Zhou, Xiaoli (author), Ghaffarian Niasar, M. (author), Sheng, Gehao (author), Jiang, Xiuchen (author)
Optical partial discharge (PD) detection is an efficient means of diagnosing the insulation status of power equipment. C4F7N/CO2 gas mixture is a very potential environmentally-friendly SF6 substitute gas, and its PD optical characteristics need to be studied to guide the PD diagnosis of novel C4F7N/CO2 equipment. Therefore, this article...
journal article 2022
document
Xiao, Hong (author), Zhang, Zhihai (author), Chi, Yihao (author), Wang, Xiaoyu (author), Wang, Haoyu (author), Jiang, Ziqing (author)
The sand intrusion in railway tracks in sandy regions can significantly change the mechanical behaviour of tracks and thus threaten the safety of train operation. This paper presents substantial field tests on both sandy and clean railway tracks to study the effect of sand intrusion on the longitudinal resistance of ballast bed and the...
journal article 2022
document
Giasin, Khaled (author), Atif, Muhammad (author), Ma, Yuan (author), Jiang, Chulin (author), Koklu, Ugur (author), Sinke, J. (author)
GLARE laminates are multi-layered metal-composite materials created from bonding sheets of metallic alloys with carbon or glass fibre layers. The application of hybrid-conventional machining processes such as ultrasonic-assisted drilling (UAD) is becoming of great interest to the aerospace industry due to its capability in reducing the...
journal article 2022
Searched for: +
(61 - 80 of 237)

Pages