Searched for: +
(1 - 20 of 28)

Pages

document
Silvestri, C. (author), Riccio, M. (author), Poelma, R.H. (author), Morana, B. (author), Vollebregt, S. (author), Santagata, F. (author), Irace, A. (author), Zhang, G.Q. (author), Sarro, P.M. (author)
Thermal material properties play a fundamental role in the thermal management of microelectronic systems. The porous nature of carbon nanotube (CNT) arrays results in a very high surface area to volume ratio, which makes the material attractive for surface driven heat transfer mechanisms. Here, we report on the heat transfer performance of...
journal article 2016
document
Poelma, R.H. (author), Morana, B. (author), Vollebregt, S. (author), Schlangen, H.E.J.G. (author), Van Zeijl, H.W. (author), Fan, X. (author), Zhang, G.Q. (author)
The porous nature of carbon nanotube (CNT) arrays allows for the unique opportunity to tailor their mechanical response by the infiltration and deposition of nanoscale conformal coatings. Here, we fabricate novel photo-lithographically defined CNT pillars that are conformally coated with amorphous silicon carbide (a-SiC) to strengthen the...
journal article 2014
document
Romijn, J. (author), Vollebregt, S. (author), Middelburg, L.M. (author), el Mansouri, B. (author), van Zeijl, H.W. (author), May, Alexander (author), Erlbacher, Tobias (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
The wide bandgap of silicon carbide (SiC) has attracted a large interest over the past years in many research fields, such as power electronics, high operation temperature circuits, harsh environmental sensing, and more. To facilitate research on complex integrated SiC circuits, ensure reproducibility, and cut down cost, the availability of a...
journal article 2022
document
Romijn, J. (author), Vollebregt, S. (author), Middelburg, L.M. (author), el Mansouri, B. (author), van Zeijl, H.W. (author), May, Alexander (author), Erlbacher, Tobias (author), Leijtens, Johan (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
This work demonstrates the first on-chip UV optoelectronic integration in 4H-SiC CMOS, which includes an image sensor with 64 active pixels and a total of 1263 transistors on a 100 mm2 chip. The reported image sensor offers serial digital, analog, and 2-bit ADC outputs and operates at 0.39 Hz with a maximum power consumption of 60 μW, which are...
journal article 2022
document
Mo, J. (author), LI, J. (author), Zhang, Y. (author), Romijn, J. (author), May, Alexander (author), Erlbacher, Tobias (author), Zhang, Kouchi (author), Vollebregt, S. (author)
In this work, a highly linear temperature sensor based on a silicon carbide (SiC) p-n diode is presented. Under a constant current biasing, the diode has an excellent linear response to the temperature (from room temperature to 600°C). The best linearity (coefficient of determination ${R}^{{2}}$ = 99.98%) is achieved when the current density...
journal article 2023
document
Cui, Z. (author), Zhang, Y. (author), Hu, D. (author), Vollebregt, S. (author), Fan, J. (author), Fan, X. (author), Zhang, Kouchi (author)
Understanding the atomic diffusion features in metallic material is significant to explain the diffusion-controlled physical processes. In this paper, using electromigration experiments and molecular dynamic (MD) simulations, we investigate the effects of grain size and temperature on the self-diffusion of polycrystalline aluminium (Al). The...
journal article 2022
document
Tang, H. (author), Gao, Chenshan (author), Yang, Huiru (author), Sacco, L.N. (author), Sokolovskij, R. (author), Ye, H. (author), Vollebregt, S. (author), Fan, X. (author), Zhang, Kouchi (author)
In this paper, tin oxidation (SnO x )/tin-sulfide (SnS) heterostructures are synthesized by the post-oxidation of liquid-phase exfoliated SnS nanosheets in air. We comparatively analyzed the NO2 gas response of samples with different oxidation levels to study the gas sensing mechanisms. The results show that the samples oxidized at 325 °C are...
journal article 2021
document
van Ginkel, H.J. (author), Vollebregt, S. (author), Schmidt-Ott, A. (author), Zhang, Kouchi (author)
A method is presented to directly measure the mass output of an impaction printer coupled with a spark ablation generator. It is based on a quartz crystal microbalance and shown to be reliable in quantifying mass deposition rate. Here, the method is demonstrated with an Au nanoparticle aerosol synthesized under several spark ablation and...
journal article 2022
document
Zhang, Y. (author), Du, L. (author), Bäcke, Olof (author), Kalbfleisch, Sebastian (author), Zhang, Kouchi (author), Vollebregt, S. (author), Hörnqvist Colliander, Magnus (author)
As the dimensions of interconnects in integrated circuits continue to shrink, an urgent need arises to understand the physical mechanism associated with electromigration. Using x-ray nanodiffraction, we analyzed the stresses in Blech-structured pure Cu lines subjected to different electromigration conditions. The results suggest that the...
journal article 2024
document
Sattari, R. (author), Hu, D. (author), Liu, X. (author), van Zeijl, H.W. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
The rapid development of power electronics has challenged the thermal integrity of semiconductor packaging. Further developments in this domain can be supported significantly by utilizing fast and flexible thermal characteristic evaluation. This study employs the transient dual interface method (TDIM) to characterize and compare the thermal...
journal article 2023
document
van Ginkel, H.J. (author), Mitterhuber, Lisa (author), van de Putte, Marijn Willem (author), Huijben, Mark (author), Vollebregt, S. (author), Zhang, Kouchi (author)
Reducing the thermal conductivity of thermoelectric materials has been a field of intense research to improve the efficiency of thermoelectric devices. One approach is to create a nanostructured thermoelectric material that has a low thermal conductivity due to its high number of grain boundaries or voids, which scatter phonons. Here, we present...
journal article 2023
document
Hu, D. (author), Shah, M.B. (author), Fan, J. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
Driving by the increased demand for hermetic packaging in the more than Moore (MtM) roadmap, a Cu nanoparticle sintering-enabled hermetic sealing solution was developed with a small-size sealing ring. The developed technology simplifies microfabrication and requires less surface roughness using a sinterable Cu nanoparticle paste. A 50μm size...
journal article 2023
document
Yazdan Mehr, M. (author), Vollebregt, S. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
A graphene monolayer has been successfully coated on one side of a bisphenol-A-polycarbonate (BPA-PC) plate, used as a substrate for remote phosphor applications in light-emitting diode (LED)-based products. Using a photoresist transferring method, graphene sheet has been coated on BPA-PC plates. The results show that this graphene monolayer...
journal article 2017
document
Romijn, J. (author), Sanseven, Seçil (author), Zhang, Kouchi (author), Vollebregt, S. (author), Sarro, Pasqualina M (author)
An angle sensitive optical sensor without conventional optics is presented in this article. The reported device omits the need for adding 3-D optics in postprocessing by monolithic integration of complimentary metal-oxide semiconductor compatible diffraction grating layers, which cuts down the fabrication costs and allows for miniaturization...
journal article 2022
document
Silvestri, C. (author), Riccio, Michele (author), Poelma, René H. (author), Jovic, A. (author), Morana, B. (author), Vollebregt, S. (author), Irace, Andrea (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
The high aspect ratio and the porous nature of spatially oriented forest-like carbon nanotube (CNT) structures represent a unique opportunity to engineer a novel class of nanoscale assemblies. By combining CNTs and conformal coatings, a 3D lightweight scaffold with tailored behavior can be achieved. The effect of nanoscale coatings, aluminum...
journal article 2018
document
Li, X. (author), Wei, L. (author), Poelma, René H. (author), Vollebregt, S. (author), Wei, J. (author), Urbach, Paul (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
This paper presents a tuneable binary amplitude Fresnel lens produced by wafer-level microfabrication. The Fresnel lens is fabricated by encapsulating lithographically defined vertically aligned carbon nanotube (CNT) bundles inside a polydimethyl-siloxane (PDMS) layer. The composite lens material combines the excellent optical absorption...
journal article 2016
document
Mirza Gheytaghi, Amir (author), Ghaderi, M. (author), Vollebregt, S. (author), Ahmadi, M. (author), Wolffenbuttel, R.F. (author), Zhang, Kouchi (author)
In this paper, the growth of optimized vertically aligned multi-walled carbon nanotube (VA-MWCNT) forests by LPCVD method for use in a large-area absorber in infrared detectors is presented. The effect of synthesis temperature (500−700 °C) and time (1−10 min) on the optical absorption coefficient in the infrared (2−20 μm) is investigated by...
journal article 2020
document
Mirza Gheytaghi, Amir (author), Poelma, René H. (author), Sacco, L.N. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
In this paper, the compressive stress of pristine and coated vertically-aligned (VA) multi-walled (MW) carbon nanotube (CNT) pillars were investigated using flat-punch nano-indentation. VA-MWCNT pillars of various diameters (30–150 µm) grown by low-pressure chemical vapor deposition on silicon wafer. A conformal brittle coating of niobium...
journal article 2020
document
Middelburg, L.M. (author), van Zeijl, H.W. (author), Vollebregt, S. (author), Morana, B. (author), Zhang, Kouchi (author)
This work focusses on the design and fabrication of surface micromachined pressure sensors, designed in a modular way for the integration with analog front-end read-out electronics. Polycrystalline 3C silicon carbide (SiC) was used to fabricate free-standing high topography cavities exploiting surface micromaching. The poly-SiC was in-situ...
journal article 2020
document
Sun, J. (author), Hu, D. (author), Liu, Zewen (author), Middelburg, L.M. (author), Vollebregt, S. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A micro-scale pressure sensor based on suspended AlGaN/GaN heterostructure is reported with non-linear sensitivity. By sealing the cavity, vacuum sensing at various temperatures was demonstrated. To validate the proposed concept of the AlGaN/GaN vacuum sensor, a 700 µm diameter circular membrane was electrically characterized under applied...
journal article 2020
Searched for: +
(1 - 20 of 28)

Pages