Searched for: +
(1 - 19 of 19)
document
Yang, Huiru (author), Huang, Qianming (author), Wang, S. (author), Zong, Qihang (author), Tan, C. (author), Ye, H. (author), Zhang, Kouchi (author)
Flexible strain sensors play a crucial role in health monitoring, smart wearable devices, and human–machine interaction. Three-dimensional surface evaluation methods for strain sensors offer advantages by being closer to actual strain, featuring a larger working range, and being more suitable for multidirectional strain. In this study, a...
journal article 2024
document
Li, Shizhen (author), Liu, X. (author), Gao, Chenshan (author), Wang, S. (author), Li, Jun (author), Ye, Huaiyu (author), Zhang, Kouchi (author), Wu, Shaohui (author)
The significance of wafer bonding is fundamental to the progression of electronic systems. Common fabrication techniques for Cu pillars play a crucial role in establishing resilient and efficient interconnects within semiconductor devices. It is imperative to explore the potential of nano-copper as an alternative material to overcome limitations...
conference paper 2024
document
Wang, Jianyun (author), Zhang, Rui (author), Hou, Fuxing (author), Ye, G. (author)
Microbial induced calcium carbonate precipitation (MICP) technology has been successfully used to enhance the properties of recycled concrete aggregates. However, the complex source and varied physical and chemical properties of recycled aggregates may have influence on the modification efficiency since microbes are often sensitive to the...
journal article 2024
document
Tan, C. (author), Wang, S. (author), Yang, Huiru (author), Huang, Qianming (author), Li, Shizhen (author), Liu, X. (author), Ye, H. (author), Zhang, Kouchi (author)
Short-wave ultraviolet (also called UVC) irradiation is a well-adopted method of viral inactivation due to its ability to damage genetic material. A fundamental problem with the UVC inactivation method is that its mechanism of action on viruses is still unknown at the molecular level. To address this problem, herein we investigate the...
journal article 2023
document
Liu, Ke (author), Tan, C. (author), Li, Shizhen (author), Yuan, Wucheng (author), Liu, X. (author), Zhang, Kouchi (author), French, P.J. (author), Ye, H. (author), Wang, S. (author)
This paper proposes and simulates research on the reverse recovery characteristics of two novel superjunction (SJ) MOSFETs by adjusting the doping profile. In the manufacturing process of the SJ MOSFET using multilayer epitaxial deposition (MED), the position and concentration of each Boron bubble can be adjusted by designing different doping...
journal article 2023
document
Yang, Huiru (author), Wang, S. (author), Huang, Qianming (author), Tan, C. (author), Gao, Chenshan (author), Xu, Siyuan (author), Ye, Huaiyu (author), Zhang, Kouchi (author)
Flexible strain sensors based on nanomaterials have sparked a lot of interest in the field of wearable smart electronics. Laser induced graphene (LIG) based sensors in particular stand out due to their straightforward fabrication procedure, three-dimensional porous structures, and exceptional electromechanical capabilities. Recent studies...
journal article 2023
document
Huang, Qian Ming (author), Yang, Huiru (author), Wang, S. (author), Liu, X. (author), Tan, C. (author), Luo, Anxin (author), Xu, Siyuan (author), Zhang, Kouchi (author), Ye, H. (author)
Laser-induced graphene (LIG) has aroused a wide range of research interests ranging from micro-nano energy devices to the Internet of Things (IoT). Nevertheless, the non-degradability of most-used synthetic polymer carbon sources poses a serious threat to the environment. In this work, ecofriendly chitosan-based derivatives, including...
journal article 2023
document
Wang, S. (author), Zong, Qihang (author), Yang, Huiru (author), Tan, C. (author), Huang, Qianming (author), Liu, X. (author), Zhang, Kouchi (author), French, P.J. (author), Ye, H. (author)
The fabrication of flexible pressure sensors with low cost, high scalability, and easy fabrication is an essential driving force in developing flexible electronics, especially for high-performance sensors that require precise surface microstructures. However, optimizing complex fabrication processes and expensive microfabrication methods...
journal article 2023
document
Xie, F. (author), Hao, Zhiguo (author), Ye, Dongmeng (author), Yang, Songhao (author), Li, Chuanxi (author), Dai, Guoan (author), Zhang, Baohui (author), Wang, Ting (author)
The existing protection techniques for high-voltage direct-current (HVDC) grids suffer from several shortcomings such as high sampling frequency, poor robustness, and reliance on simulation for threshold setting. To solve these problems, this paper proposes a non-unit protection method for modular multilevel converter (MMC)-based HVDC grids...
journal article 2023
document
Wang, S. (author), Yang, Huiru (author), Zong, Qihang (author), Huang, Qianming (author), Tan, C. (author), Gao, Chenshan (author), Li, Shizhen (author), Ye, H. (author), Zhang, Kouchi (author), French, P.J. (author)
In recent years, metal crack-based stretchable flexible strain sensors have attracted significant attention in wearable device applications due to their extremely high sensitivity. However, the tradeoff between sensitivity and detection range has been an intractable dilemma, severely limiting their practical applications. Herein, we propose a...
journal article 2023
document
Li, Shizhen (author), Jiang, Jing (author), Liu, X. (author), Wang, S. (author), Zhang, Zhonghua (author), Ye, Huaiyu (author)
Substrate metallization is a crucial factor affecting the mechanical properties of sintered nanoparticles in microelectronics applications, as it is essential for ensuring good adhesion between the substrate and the sintered material. In this study, we investigated the influence of metallization on pressure-assisted nanocopper sintering and...
conference paper 2023
document
Wang, S. (author), Tan, Yanlong (author), Liu, Xu (author), Li, Shizhen (author), Liu, Ke (author), Yuan, Wucheng (author), Li, Tao (author), Zhang, Kouchi (author), French, P.J. (author), Ye, Huaiyu (author), Tan, Chunjian (author)
In this article, the avalanche withstand capability and transient failure model of commercial 1200 V asymmetric trench gate SiC MOSFETs are investigated by experiment and simulation under single-pulse unclamped inductive switching (UIS) conditions. The limiting avalanche current and limiting avalanche energy of the device are determined by...
conference paper 2023
document
Jiang, Jing (author), Wang, S. (author), Liu, X. (author), Liu, Jianhui (author), Li, Jun (author), Zhou, Dexiang (author), Zhang, Kouchi (author), Ye, H. (author), Tan, C. (author)
High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...
journal article 2022
document
Tan, C. (author), Wang, S. (author), Liu, X. (author), Jiang, Jing (author), Zhang, Kouchi (author), Ye, H. (author)
On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...
conference paper 2022
document
Tan, C. (author), Wang, S. (author), Yang, Huiru (author), Huang, Qianming (author), Li, Shizhen (author), Liu, X. (author), Ye, H. (author), Zhang, Kouchi (author)
Recent reports focus on the hydrogenation engineering of monolayer boron phosphide and simultaneously explore its promising applications in nanoelectronics. Coupling density functional theory and finite element method, we investigate the bowtie triangle ring microstructure composed of boron phosphide with hydrogenation based on structural and...
journal article 2022
document
Tan, C. (author), Wang, S. (author), Li, Shizhen (author), Liu, X. (author), Wei, Jia (author), Zhang, Kouchi (author), Ye, H. (author)
Owing to the outstanding physical properties of graphene, its biosensing applications implemented by the terahertz metasurface are widely concerned and studied. Here, we present a novel design of the graphene metasurface, which consists of an individual graphene ring and an H-shaped graphene structure. The graphene metasurface exhibits a dual...
journal article 2022
document
Wang, Wei (author), Zhang, Shizhe (author), Ye, G. (author), Noguchi, Takafumi (author)
Alkali activated materials (AAMs) have received worldwide attention due to its lower embodied energy and environmental impact than that of traditional cementitious materials. However, the activators with high alkalinity may raise the risk of alkali silica reaction (ASR) induced deterioration when reactive aggregates are used, which thereby...
conference paper 2021
document
Ye, H. (author), Hu, F.F. (author), Tang, H. (author), Yang, L.W. (author), Chen, X.P. (author), Wang, L.G. (author), Zhang, Kouchi (author)
In this work, the structural, electronic and optical properties of germanene and ZnSe substrate nanocomposites have been investigated using first-principles calculations. We found that the large direct-gap ZnSe semiconductors and zero-gap germanene form a typical orbital hybridization heterostructure with a strong binding energy, which shows...
journal article 2018
document
Yang, Huiru (author), Wang, Zeping (author), Ye, H. (author), Zhang, Kai (author), Chen, X. (author), Zhang, Kouchi (author)
Sensitive materials for formaldehyde (HCHO) sensor need high sensitivity and selectivity. The research on two dimensional (2D) sensitive material is growing, and most studies focus on the pristine or modified graphene. So it is essential to introduce other 2D materials into HCHO gas sensor. In this report, the adsorption behaviors of organic...
journal article 2018
Searched for: +
(1 - 19 of 19)