- document
-
Zhou, J. (author), Qian, S. (author), Sierra Beltran, M.G. (author), Ye, G. (author), Van Breugel, K. (author), Li, V.C. (author)Nowadays limestone powder and blast furnace slag (BFS) are widely used in concrete as blended materials in cement. The replacement of Portland cement by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production of these two materials needs less energy and causes less CO2 emission than Portland cement...journal article 2009
- document
-
Qian, S. (author), Li, V.C. (author), Zhou, J. (author)Strain hardening cementitious composites (SHCCs) have seen increasing field applications in past decade, yet existing quality control test methods for tensile properties are sometime difficult to implement. This paper presents a new simple inverse method for quality control of tensile strain capacity by conducting beam flexural test. It is shown...conference paper 2010
- document
-
Maresca, D. (author), Jansen, K. (author), Renaud, G. (author), Van Soest, G. (author), Li, X. (author), Zhou, Q. (author), De Jong, N. (author), Shung, K.K. (author), Van der Steen, A.F.W. (author)We demonstrate the feasibility of intravascular ultrasound (IVUS) chirp imaging as well as chirp reversal ultrasound contrast imaging at intravascular ultrasound frequency. Chirp excitations were emitted with a 34?MHz single crystal intravascular transducer and compared to conventional Gaussian-shaped pulses of equal acoustic pressure. The...journal article 2012
- document
-
Jansen, K. (author), Van der Steen, A.F.W. (author), Wu, M. (author), Van Beusekom, H.M.M. (author), Springeling, G. (author), Li, X. (author), Zhou, Q. (author), Shung, K.K. (author), De Kleijn, D.P.V. (author), Van Soest, G. (author)The natural history of atherosclerosis is marked by changes in the lipid biochemistry in the diseased arterial wall. As lesions become more vulnerable, different cholesterol species accumulate in the plaque. Understanding unstable atherosclerosis as a pharmacological and interventional therapeutic target requires chemically specific imaging of...journal article 2014
- document
-
Zhu, Qing (author), Li, Yun (author), Xiong, Qing (author), Zlatanova, S. (author), Ding, Yulin (author), Zhang, Yeting (author), Zhou, Yan (author)The Open Geospatial Consortium (OGC) Geography Markup Language (GML) standard provides basic types and a framework for defining geo-informational data models such as CityGML and IndoorGML, which provide standard information models for 3D city modelling and lightweight indoor network navigation. Location information, which is the semantic engine...journal article 2016
- document
-
Xiao, Tianhang (author), Li, Zhengzhou (author), Deng, S. (author), Ang, Haisong (author), Zhou, Xinchun (author)The aerodynamic characteristics around a micro air vehicle wing with an inverse-Zimmerman configuration are numerically investigated by an in-house programmed solver particularly dedicated for aircrafts operating in low Reynolds number regime. The complex three-dimensional aerodynamic performance was investigated in terms of force generation...journal article 2016
- document
-
Li, Chuanrong (author), Zhou, Mei (author), Liu, Menghua (author), Ma, Lian (author), Wang, J. (author)Concealed cars extraction from point clouds data acquired by airborne laser scanning has gained its popularity in recent years. However, due to the occlusion effect, the number of laser points for concealed cars under trees is not enough. Thus, the concealed cars extraction is difficult and unreliable. In this paper, 3D point cloud...journal article 2016
- document
-
Xiong, Qing (author), Zhu, Qing (author), Du, Zhiqiang (author), Zlatanova, S. (author), Zhang, Yeting (author), Zhou, Yan (author), Li, Yun (author)Intelligent navigation and facility management in complex indoor environments are issues at the forefront of geospatial information science. Indoor spaces with fine geometric and semantic descriptions provide a solid foundation for various indoor applications, but it is difficult to comprehensively extract free multi-floor indoor spaces from...journal article 2016
- document
-
Li, Y. (author), Zhou, J. (author), Pavanram, P. (author), Leeflang, M.A. (author), Fockaert, L.I. (author), Pouran, B. (author), Tümer, N. (author), Schröder, K. U. (author), Mol, J.M.C. (author), Weinans, Harrie (author), Jahr, H. (author), Zadpoor, A.A. (author)An ideal bone substituting material should be bone-mimicking in terms of mechanical properties, present a precisely controlled and fully interconnected porous structure, and degrade in the human body to allow for full regeneration of large bony defects. However, simultaneously satisfying all these three requirements has so far been highly...journal article 2017
- document
-
Li, Nana (author), Jia, Li (author), Lu, Jing (author), Menenti, M. (author), Zhou, J. (author)The regional surface soil heat flux (G0) estimation is very important for the large-scale land surface process modeling. However, most of the regional G0 estimation methods are based on the empirical relationship between G0 and the net radiation flux. A physical model based on harmonic analysis was improved (referred to as "HM model") and...journal article 2017
- document
-
Wang, S. (author), Xu, Y. (author), Zhou, J. (author), Li, H. (author), Chang, Jiang (author), Huan, Z. (author)Iron-matrix composites with calcium silicate (CS) bioceramic as the reinforcing phase were fabricated through powder metallurgy processes. The microstructures, mechanical properties, apatite deposition and biodegradation behavior of the Fe-CS composites, as well as cell attachment and proliferation on<br/>their surfaces, were characterized. In...journal article 2017
- document
-
Li, Y. (author), Yong, Bin (author), van Oosterom, P.J.M. (author), Lemmens, M.J.P.M. (author), Wu, Huayi (author), Ren, Liliang (author), Zheng, Mingxue (author), Zhou, Jiajun (author)The capability of acquiring accurate and dense three-dimensional geospatial information that covers large survey areas rapidly enables airborne light detection and ranging (LiDAR) has become a powerful technology in numerous fields of geospatial applications and analysis. LiDAR data filtering is the first and essential step for digital elevation...journal article 2017
- document
-
Zheng, Chaolei (author), Jia, L. (author), Hu, Guangcheng (author), Menenti, M. (author), Lu, Jing (author), Zhou, J. (author), Wang, Kun (author), Li, Zhansheng (author)The Pan-Eurasian and African Continents are characterized by large ranges of climates varying from humid, semi-humid, semi-arid and arid regions, and great challenges exist in water allocation for different sectors that related to water resource and food security, which depends strongly on the water use information. Quantitative information...journal article 2017
- document
-
Wang, Xu Ping (author), Zhou, Peng Fei (author), Li, Zhi Gang (author), Yang, Bo (author), Hollmann, F. (author), Wang, Yong Hua (author)A Ser105Ala mutant of the lipase B from Candida antarctica enables 'perhydrolase-only' reactions. At the example of the chemoenzymatic Baeyer-Villiger oxidation of cyclohexanone, we demonstrate that with this mutant selective oxidation can be achieved in deep eutectic solvent while essentially eliminating the undesired hydrolysis reaction of...journal article 2017
- document
-
Li, Y. (author), Jahr, H. (author), Lietaert, K. (author), Pavanram, P. (author), Yilmaz, A. (author), Fockaert, L.I. (author), Leeflang, M.A. (author), Pouran, B. (author), Gonzalez Garcia, Y. (author), Weinans, Harrie (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most...journal article 2018
- document
-
Yang, Yang (author), Li, Diquan (author), Tong, Tiegang (author), Zhang, D. (author), Zhou, Yatong (author), Chen, Yangkang (author)Strong noise is one of the toughest problems in the controlled-source electromagnetic (CSEM) method, which highly affects the quality of recorded data. The three main types of noise existing in CSEM data are periodic noise, Gaussian white noise, and nonperiodic noise, among which the nonperiodic noise is thought to be the most difficult to...journal article 2018
- document
-
Li, Y. (author), Lietaert, K. (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...journal article 2019
- document
-
Yuan, Ye (author), Tang, Xiuchuan (author), Zhou, Wei (author), Pan, W. (author), Li, Xiuting (author), Zhang, Hai Tao (author), Ding, Han (author), Goncalves, Jorge (author)Cyber-physical systems embed software into the physical world. They appear in a wide range of applications such as smart grids, robotics, and intelligent manufacturing. Cyber-physical systems have proved resistant to modeling due to their intrinsic complexity arising from the combination of physical and cyber components and the interaction...journal article 2019
- document
-
Li, Y. (author), Jahr, H. (author), Zhou, J. (author), Zadpoor, A.A. (author)Partially due to the unavailability of ideal bone substitutes, the treatment of large bony defects remains one of the most important challenges of orthopedic surgery. Additively manufactured (AM) biodegradable porous metals that have emerged since 2018 provide unprecedented opportunities for fulfilling the requirements of an ideal bone...review 2020
- document
-
Li, Y. (author), Pavanram, P. (author), Zhou, J. (author), Lietaert, K. (author), Bobbert, F.S.L. (author), Kubo, Yusuke (author), Leeflang, M.A. (author), Jahr, H. (author), Zadpoor, A.A. (author)Topological design provides additively manufactured (AM) biodegradable porous metallic biomaterials with a unique opportunity to adjust their biodegradation behavior and mechanical properties, thereby satisfying the requirements for ideal bone substitutes. However, no information is available yet concerning the effect of topological design on...journal article 2020