Searched for: collection%253Air
(1 - 20 of 29)

Pages

document
Zhang, Liang (author), Li, Guang (author), Chen, Huang (author), Tang, Jingtian (author), Yang, Guanci (author), Yu, Mingbiao (author), Hu, Yong (author), Xu, Jun (author), Sun, J. (author)
Audio magnetotelluric (AMT) is commonly used in mineral resource exploration. However, the weak energy of AMT signals makes them susceptible to being overwhelmed by noise, leading to erroneous geophysical interpretations. In recent years, deep learning has been applied to AMT denoising and has shown better denoising performance compared to...
journal article 2024
document
Yu, Hao (author), Fu, Jiabo (author), Wang, Chenchong (author), Chen, Yinping (author), Wang, Lingyu (author), Fang, Haixing (author), Li, Jinguo (author), van der Zwaag, S. (author), Xu, Wei (author)
To achieve an effective design of additively manufacturable Ni superalloys with decent service performance, a hybrid computational design model has been developed, where the strategy to tailor local elemental segregations was integrated within a scheme of minimizing the cracking susceptibility. More specifically, the phase boundary of primary...
journal article 2024
document
Chen, Y. (author), de Lima, Luiz Miranda (author), Li, Zhenming (author), Ma, Bin (author), Lothenbach, Barbara (author), Yin, Suhong (author), Yu, Qijun (author), Ye, G. (author)
The synthesis of N-A-S-H gel with high Si/Al ratios (>2) has been rarely reported in the literature, leaving the establishment of a reliable synthesis route as an open challenge. This paper aims to synthesize N-A-S-H gels with Si/Al ratios ranging from 1 to 3 and establish their thermodynamic database. The effects of reaction temperature,...
journal article 2024
document
Yu, Ying-Ying (author), Li, Xin (author), Ji, Y. (author)
Cubic Bézier curves are widely used in computer graphics and geometric modeling, favored for their intuitive design and ease of implementation. However, self-intersections within these curves can pose significant challenges in both geometric modeling and analysis. This paper presents a comprehensive approach to detecting and computing self...
journal article 2024
document
Wen, Weijie (author), Lyu, Rui (author), Li, Botong (author), Cao, Hong (author), Yu, Jiali (author), Li, Bin (author), Popov, M. (author)
For the black start-up of DC micro-grids, three-phase charging resistors are required to limit the uncontrollable surge current. The main drawback of this start-up method is the difficulty in determining the appropriate resistance value to achieve a rapid start-up and limit the surge current with the change of grid parameters. To address this...
journal article 2023
document
Cong, Yangfan (author), Yu, Suihuai (author), Chu, Jianjie (author), Su, Zhaojing (author), Huang, Y. (author), Li, Feilong (author)
Eliciting user needs from mass online reviews is playing a significant role in the product iteration process. Efficient user needs elicitation does achieve considerable benefits for maintaining higher competitiveness and a speedier lifecycle. However, there is inevitably an online review scarcity about new products due to the short time on...
journal article 2023
document
Zhu, Yifan (author), Lu, Huimin (author), Wang, Jianping (author), Yu, Tongjun (author), Li, Z.Z.L. (author), Tian, Yucheng (author)
In order to improve the light extraction of AlGaN-based short wavelength ultraviolet light emitting diodes (DUC-LEDs), a type of microstructure with high aspect ratio is introduced and optimized on the AlN substrate surface. And, particle swarm optimization (PSO) algorithm is used to inverse design of the surface microstructure to maximize...
journal article 2023
document
Li, Jiayu (author), Xu, Yunbo (author), Jing, Yi (author), Gao, Yijing (author), Liu, Hongliang (author), Yu, Yongmei (author), Banis, Alexandros (author), Kestens, L.A.I. (author), Petrov, R.H. (author)
The phase transformations, microstructure and properties of two Medium-Mn processed via quenching and partitioning steels were compared in this contribution and a new strategy for controlling mechanical properties by introducing and controlling cold-worked ferrite prior to heat treatment is proposed. It was found that during heating, the...
journal article 2023
document
Wang, L. (author), Li, Erlei (author), Zhou, Zongyan (author), Zhang, Baicheng (author), Yu, Aibing (author)
Powder bed fusion additive manufacturing has been applied to the fabrication of functionally graded materials. A new design that allows the material composition to change along the direction perpendicular to the powder spreading has been reported in the literature. Based on this design, this work examines the quality of the graded spread...
journal article 2023
document
Li, Lingjie (author), Yu, Wenjian (author), Batselier, K. (author)
In recent years, the application of tensors has become more widespread in fields that involve data analytics and numerical computation. Due to the explosive growth of data, low-rank tensor decompositions have become a powerful tool to harness the notorious curse of dimensionality. The main forms of tensor decomposition include CP...
journal article 2022
document
Zhao, Pengjun (author), Zeng, Liangen (author), Li, Peilin (author), Lu, Haiyan (author), Hu, Haoyu (author), Li, Chengming (author), Zheng, Mengyuan (author), Li, Haitao (author), Yu, Zhao (author), Qi, Y. (author)
The threat of global climate change has caused the international community to pay close attention to atmospheric levels of greenhouse gases such as carbon dioxide. Transportation sector carbon dioxide emissions efficiency (TSCDEE) is a key indicator used to prioritize sustainable development in the transportation sector. In this paper, the...
journal article 2022
document
Tian, Zhan (author), Yu, Ziwei (author), Li, Yifan (author), Ke, Q. (author), Liu, Junguo (author), Luo, Hongyan (author), Tang, Yingdong (author)
Climate change and rapid urbanization have made it difficult to predict the risk of pollution in cities under different types of rainfall. In this study, a data-driven approach to quantify the effects of rainfall characteristics on river pollution was proposed and applied in a case study of Shiyan River, Shenzhen, China. The results indicate...
journal article 2022
document
Yu, M. (author), Liu, X. (author), Wood, Paul (author), Wei, Li (author), Wang, Guoqing (author), Zhang, Jianyun (author), Li, Qiongfang (author)
Due to an intensification of anthropogenic activities and climate change in recent decades, the hydrological connections and relationships between rivers and lakes have been significantly modified globally. Poyang Lake is one of the largest freshwater lakes globally and is one of the few that remain naturally connected to the Yangtze River....
journal article 2022
document
Chen, Y. (author), Dolado, Jorge S. (author), Li, Z. (author), Yin, Suhong (author), Yu, Qijun (author), Kostiuchenko, A. (author), Ye, G. (author)
In this paper, the atomic structures of sodium aluminosilicate hydrate (N–A–S–H) gels with different Si/Al ratios are studied by molecular dynamics simulation. An N–A–S–H gel model was obtained from the polymerization of Si(OH)<sub>4</sub> and Al(OH)<sub>3</sub> monomers with the use of a reactive force field (ReaxFF). The simulated atomic...
journal article 2022
document
Li, Changzhen (author), Yu, Junyi (author), Xue, J. (author), Chen, Wei (author), Wang, Shoufeng (author), Yang, Kun (author)
For a long time, the development of maritime communication has been restricted by the low data rate, high-latency and high cost of the current communication systems. The upgrade of new generation mobile communication technologies is attracting more and more attention to conduct a shore-based broadband mobile communication network with high...
journal article 2021
document
Li, Jinmei (author), Zhang, Shuting (author), Guo, Lizheng (author), Chen, L. (author), Yu, Zhisheng (author)
The generation and dissemination of antibiotic resistance bacteria (ARB) and antibiotic resistance genes (ARGs) in the environment has become a critical risk to human health. This study is based on a pilot-scale simulated water distribution system to understand the effects of chlorine disinfection treatment (without free chlorine) on ARB and...
journal article 2021
document
Sokolovskij, R. (author), Zhang, Jian (author), Zheng, Hongze (author), Li, Wenmao (author), Jiang, Y. (author), Yang, Gaiying (author), Yu, H. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
The present work reports on the hydrogen gas detection properties of Pt-AlGaN/GaN high electron mobility transistor (HEMT) sensors with recessed gate structure. Devices with gate recess depths from 5 to 15 nm were fabricated using a precision cyclic etching method, examined with AFM, STEM and EDS, and tested towards H 2 response at high...
journal article 2020
document
Zhang, Hua (author), Yu, Li (author), Liu, Tao (author), Ni, Hongwei (author), Li, Y. (author), Chen, Z. (author), Yang, Y. (author)
Decreasing the preheating temperature is an effective step to control the energy consumption in the hot rolling process. In order to obtain the lowest preheating temperature to prepare enough thickness of oxide scale in the hot rolling process, the oxidation resistance of commercial steel samples with different Al and Si contents were...
journal article 2020
document
Yu, Mei (author), Shen, Heng (author), Li, J. (author)
We present a scheme to entangle two microwave fields by using the nonlinear magnetostrictive interaction in a ferrimagnet. The magnetostrictive interaction enables the coupling between a magnon mode (spin wave) and a mechanical mode in the ferrimagnet, and the magnon mode simultaneously couples to two microwave cavity fields via the magnetic...
journal article 2020
document
Sokolovskij, R. (author), Zhang, Jian (author), Zheng, Hongze (author), Li, Wenmao (author), Jiang, Yang (author), Yang, Gaiying (author), Yu, Hongyu (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
The present work reports on the hydrogen gas detection properties of Pt-AlGaN/GaN high electron mobility transistor (HEMT) sensors with recessed gate structure. Devices with gate recess depths from 5 to 15 nm were fabricated using a precision cyclic etching method, examined with AFM, STEM and EDS, and tested towards H2 response at high...
journal article 2020
Searched for: collection%253Air
(1 - 20 of 29)

Pages