The coupling of solar panels and energy storage is inevitable and especially pertinent in places with no access to the electricity grid. This combination must be modular, providing the opportunity to scale up the system if energy demand increases, but also easy to install and user-friendly. These requirements validate the PV-Battery Integrated Module (PBIM) as a potential solution for stand-Alone applications. In this paper, we assess the performance of directly integrating a battery system at the back of a PV panel in comparison to a typical solar home system (SHS) with all the components in a separated manner. The study is carried out using data from a community in the countryside of Stung Treng (Cambodia). First, the optimum battery size and PV panel rating were determined using the loss of load probability metric. Second, the extra PV power losses in the case of (PBIM) were calculated, finding that it is 2.16% less efficient than a normal SHS due to the poorer heat dissipation induced by integrating the converter and batteries at the back of the PV panel. Third, the battery capacity faded by 1% after a year of simulation. Although when compared to a typical SHS PBIM results in slightly higher system losses, the losses are moderated and their impact is minimum when considering the expected benefits derived from using PBIM in SHS. Therefore in this paper, we validate the feasibility of PBIM as a solution for standalone systems in developing countries.