Pumped Hydro Energy Storage (PHS) provides over 90% of the global long-duration energy storage capacity, yet many regions lack the steep terrain required for conventional high-head PHS. Low-head pumped hydro energy storage (LH PHS) systems address this gap in flat topographic regions but requires efficient pump-turbine technology for operation at variable low heads. This study investigates the use of a variable-speed contra-rotating pump-turbine (CR RPT) for LH PHS applications, presenting experimental results from a model-scale test rig stablished at Technische Universität Braunschweig. This test rig uses two open water surface tanks to provide head, unlike conventional hydraulic test rigs that use pumps. The CR RPT achieved hydraulic efficiencies over 80% for a wide range of operating conditions, peaking at 86.1% and 88.4% for pump and turbine modes, respectively. Additionally, dimensionless analysis revealed that the CR-RPT occupies a unique place in the market and that it achieves the largest power density among comparable hydraulic machines, facilitating greater power output and thus streamlining mechanical and civil engineering requirements for LH PHS.

Hydropower plays a critical role in global renewable energy production, yet its environmental impacts on aquatic ecosystems remain a concern. This study investigates the biological impacts of Shaft-Driven Variable-Speed Contra-Rotating Propeller Reversible Pump Turbines (SDCRRPTs) on fish populations, using Atlantic salmon (Salmo salar) and European eel (anguilla) as experimental models. These species present critical ecological and conservation traits, making them ideal models for assessing hydropower-induced stressors such as rapid decompression, shear, collision, and turbulence. Through Computational Fluid Dynamics (CFD) simulations and the Biological Performance Assessment (BioPA) tool, two SDCRRPT prototypes were evaluated under varying operating conditions. Results indicate that rapid decompression posed minimal risks, while shear stress was the primary cause of mortality for salmon, and collision effects were moderate but species-dependent. The optimized turbine design (Prototype 1) demonstrated improvements in adult fish passage safety compared to the initial design, particularly for eels, yet persistent vulnerabilities highlight the need for further refinements and protective measures, such as physical, mechanical or sensory behavioral barriers combined with bypass systems, to mitigate unavoidable mortality risks during turbine passage. The findings highlight the potential for species-specific design optimization to balance ecological conservation with sustainable energy production. This work underscores the importance of integrating environmental considerations into hydropower technologies to support the EU's decarbonization goals while safeguarding aquatic biodiversity.