ICON Far UltraViolet (FUV) imager contributes to the ICON science objectives by providing remote sensing measurements of the daytime and nighttime atmosphere/ionosphere. During sunlit atmospheric conditions, ICON FUV images the limb altitude profile in the shortwave (SW) band at 135.6 nm and the longwave (LW) band at 157 nm perpendicular to the satellite motion to retrieve the atmospheric O/N₂ ratio. In conditions of atmospheric darkness, ICON FUV measures the 135.6 nm recombination emission of O ⁺ ions used to compute the nighttime ionospheric altitude distribution. ICON Far UltraViolet (FUV) imager is a Czerny–Turner design Spectrographic Imager with two exit slits and corresponding back imager cameras that produce two independent images in separate wavelength bands on two detectors. All observations will be processed as limb altitude profiles. In addition, the ionospheric 135.6 nm data will be processed as longitude and latitude spatial maps to obtain images of ion distributions around regions of equatorial spread F. The ICON FUV optic axis is pointed 20 degrees below local horizontal and has a steering mirror that allows the field of view to be steered up to 30 degrees forward and aft, to keep the local magnetic meridian in the field of view. The detectors are micro channel plate (MCP) intensified FUV tubes with the phosphor fiber-optically coupled to Charge Coupled Devices (CCDs). The dual stack MCP-s amplify the photoelectron signals to overcome the CCD noise and the rapidly scanned frames are co-added to digitally create 12-second integrated images. Digital on-board signal processing is used to compensate for geometric distortion and satellite motion and to achieve data compression. The instrument was originally aligned in visible light by using a special grating and visible cameras. Final alignment, functional and environmental testing and calibration were performed in a large vacuum chamber with a UV source. The test and calibration program showed that ICON FUV meets its design requirements and is ready to be launched on the ICON spacecraft.

The ICON mission is led by the University of California-Berkeley (Space Sciences Laboratory). In the frame of this mission the Space Center of Liege was involved in the optical design optimization and related analysis, and VUV on ground calibration.

The optical calibration of the ICON-FUV instrument requires designing specific ground support equipment (GSE). The ICON-FUV instrument is a spectrographic imager that operates on two specific wavelengths in the UV (135.6 nm and 157 nm). All the operations have to be performed under vacuum UV light. The optical setup is based on a VUV monochromator coupled with a collimator that illuminates the FUV entrance slit. The instrument is placed on a manipulator providing fields pointing. Image quality and spectral properties can be then characterized for each field. OGSE, MGSE, optical calibration plan and vacuum alignment of the instrument are described.

ICON FUV is a two channel spectrographic imager that measures intensity and spatial distribution of oxygen (135.6 nm) and molecular nitrogen (157 nm) of the ionosphere. As those wavelengths are strongly absorbed by the atmosphere, the optical elements of the system have to be tested inside vacuum chambers. Prior to the instrument alignment and calibration, two 3600 gr/mm gratings were characterized. The primary focus is the measurement of the diffraction efficiencies; while the second objective is to select the best grating and to define which is the flight and the spare. A dedicated setup has been developed to assess the grating optical performances under vacuum. A 1 cm diameter collimated beam is generated using an off-axis parabola and a UV source at its focal point. The grating is placed at the center of two rotation stages collinearly aligned. One detector is placed on a rotating arm, deported from its rotation center. A PMT detector records diffracted light intensity with respect to its angular position and its wavelength. Angular incidence on the grating is tuned with the help of the second rotation stage. The grating efficiency homogeneity and scattering properties are measured through a Y-X scan.