The ICON mission is led by the University of California-Berkeley (Space Sciences Laboratory). In the frame of this mission the Space Center of Liege was involved in the optical design optimization and related analysis, and VUV on ground calibration.

In the frame of the ICON (Ionospheric Connection Explorer) mission of NASA led by UC Berkeley, CSL and SSL Berkeley have designed in cooperation a new Far UV spectro-imager. The instrument is based on a Czerny-Turner spectrograph coupled with two back imagers. The whole field of view covers [± 12° vertical, ± 9° horizontal]. The instrument is surmounted by a rotating mirror to adjust the horizontal field of view pointing by ± 30°. To meet the scientific imaging and spectral requirements the instrument has been optimized. The optimization philosophy and related analysis are presented in the present paper. PSF, distortion map and spectral properties are described. A tolerance study and alignment cases were performed to prove the instrument can be built and aligned. Finally straylight and out of band properties are discussed.

ICON FUV is a two channel spectrographic imager that measures intensity and spatial distribution of oxygen (135.6 nm) and molecular nitrogen (157 nm) of the ionosphere. As those wavelengths are strongly absorbed by the atmosphere, the optical elements of the system have to be tested inside vacuum chambers. Prior to the instrument alignment and calibration, two 3600 gr/mm gratings were characterized. The primary focus is the measurement of the diffraction efficiencies; while the second objective is to select the best grating and to define which is the flight and the spare. A dedicated setup has been developed to assess the grating optical performances under vacuum. A 1 cm diameter collimated beam is generated using an off-axis parabola and a UV source at its focal point. The grating is placed at the center of two rotation stages collinearly aligned. One detector is placed on a rotating arm, deported from its rotation center. A PMT detector records diffracted light intensity with respect to its angular position and its wavelength. Angular incidence on the grating is tuned with the help of the second rotation stage. The grating efficiency homogeneity and scattering properties are measured through a Y-X scan.