This paper considers the design of a nonlinear observer-based output-feedback controller for oil-field drill-string systems aiming to eliminate (torsional) stick-slip oscillations. Such vibrations decrease the performance and reliability of drilling systems and can ultimately lead to system failure. Current industrial controllers regularly fail to eliminate stick-slip vibrations under increasingly challenging operating conditions caused by the tendency towards drilling deeper and inclined wells, where multiple vibrational modes play a role in the occurrence of stick-slip vibrations. As a basis for controller synthesis, a multi-modal model of the torsional drill-string dynamics for a real rig is employed, and a bit-rock interaction model with severe velocity-weakening effect is used. The proposed model-based controller design methodology consists of a state-feedback controller and a (nonlinear) observer. Conditions, guaranteeing asymptotic stability of the desired equilibrium, corresponding to nominal drilling operation, are presented. The proposed control strategy has a significant advantage over existing vibration control systems as it can effectively cope with multiple modes of torsional vibration. Case study results using the proposed control strategy show that stick-slip oscillations can indeed be eliminated in realistic drilling scenarios in which industrial controllers fail to do so. Moreover, key robustness aspects of the control system involving the robustness against uncertainties in the bit-rock interaction and changing operational conditions are evidenced.@en

Torsional stick-slip vibrations decrease the performance, reliability and fail-safety of drilling systems used for the exploration and harvesting of oil, gas, min- erals and geo-thermal energy. Current industrial controllers regularly fail to eliminate stick-slip vibrations, especially when multiple torsional flexibility modes in the drill- string dynamics play a role in the onset of stick-slip vibrations. This chapter presents the experimental validation of novel robust output-feedback controllers designed to eliminate stick-slip vibrations in the presence of multiple dominant torsional flexibility modes. For this purpose, a representative experimental test setup is designed, using a model of a real-life drilling rig as a basis. The model of the dynamics of the experimental setup can be cast in Lure-type form with set-valued nonlinearities representing an (uncertain) model for the complex bit-rock interaction and the interaction between the drill-string and the borehole. The proposed controller design strategy is based on skewed-m-DK-iteration and aims at optimizing the robustness with respect to uncertainty in the non-smooth bit-rock interaction. Moreover, a closed-loop stability analysis for the non-smooth drill-string model is provided. Experimental results confirm that stick-slip vibrations are indeed eliminated using the designed controller in realistic drilling scenarios in which state-of-practice controllers have failed to achieve the same.@en