Industry Foundation Classes (IFC), the buildingSMART open standard for BIM, is underused with respect to its promising potential, since, according to the experience of practitioners and researchers working with BIM, issues in the standard’s implementation and use prevent its effective use. Nevertheless, a systematic investigation of these issues has never been carried out, and there is thus insufficient evidence for tackling the problems. The GeoBIM benchmark project is aimed at finding such evidence by involving external volunteers, reporting on various aspects of the behavior of tools (geometry, semantics, georeferencing, functionalities), analyzed and described in this article. Interestingly, different IFC software programs with the same standardized data sets yield inconsistent results, with few detectable common patterns, and significant issues are found in their support of the standard, probably due to the very high complexity of the standard data model. A companion article (Part II) describes the results of the benchmark related to CityGML, the counterpart of IFC within geoinformation.@en

Purpose: The purpose of this paper is to provide local environmental information to raise community’s environmental awareness, as a cornerstone to improve the quality of the built environment. Next to that, it provides environmental information to professionals and academia in the fields of urbanism and urban microclimate, making it available for reuse. Design/methodology/approach: The wireless sensor network (WSN) consists of sensor platforms deployed at fixed locations in the urban environment, measuring temperature, humidity, noise and air quality. Measurements are transferred to a server via long range wide area network (LoRaWAN). Data are also processed and publicly disseminated via the server. The WSN is made interactive as to increase user involvement, i.e. people who pass by a physical sensor in the city can interact with the sensor platform and request specific environmental data in near real time. Findings: Microclimate phenomena such as temperature, humidity and air quality can be successfully measured with a WSN. Noise measurements are less suitable to send over LoRaWAN due to high temporal variations. Research limitations/implications: Further testing and development of the sensor modules is needed to ensure consistent measurements and data quality. Practical implications: Due to time and budget limitations for the project group, it was not possible to gather reliable data for noise and air quality. Therefore, conclusions on the effect of the measurements on the built environment cannot currently be drawn. Originality/value: An autonomously working low-cost low-energy WSN gathering near real-time environmental data is successfully deployed. Ensuring data quality of the measurement results is subject for upcoming research.@en