Optical tweezers and associated manipulation tools in the far field have had a major impact on scientific and engineering research by offering precise manipulation of small objects. More recently, the possibility of performing manipulation with surface plasmons has opened opportunities not feasible with conventional far-field optical methods. The use of surface plasmon techniques enables excitation of hotspots much smaller than the free-space wavelength; with this confinement, the plasmonic field facilitates trapping of various nanostructures and materials with higher precision. The successful manipulation of small particles has fostered numerous and expanding applications. In this paper, we review the principles of and developments in plasmonic tweezers techniques, including both nanostructure-assisted platforms and structureless systems. Construction methods and evaluation criteria of the techniques are presented, aiming to provide a guide for the design and optimization of the systems. The most common novel applications of plasmonic tweezers, namely, sorting and transport, sensing and imaging, and especially those in a biological context, are critically discussed. Finally, we consider the future of the development and new potential applications of this technique and discuss prospects for its impact on science.@en

A new type of radially polarized (RP) cosine-Gaussian (CG) field is proposed. Through the analytical model, it is found that such RP CG beam exhibits completely different focusing properties from the reported RP plane waves. More importantly, a stable three-dimensional trap of Rayleigh particle accompanied by a subwavelength spin motion can be easily achieved using this RP CG beam.@en

The sidewall angle (SWA) of a nanostructure exerts influence on the performance of the nanostructure and plays an important role in processing nano-structural chips. It is still a great challenge to determine steep SWAs from far field measurements especially when the SWAs are close to 90°. Here, we propose a far-field detection system to determine steep SWA of a cliff-shape step structure on a silicon substrate by combining a split detector with a scanning method. The far-field radiation field is asymmetric due to the scattering of the step structure, and further numerical analysis demonstrates the reliability of this far-field measurement method. In the simulations, two key variables, i.e. the polarization state and the focus position of the incident laser beam, are considered to explore their impacts. By scanning over the structure laterally and longitudinally with both TE and TM polarizations, polarization effects on the far-field occur. These effects show higher sensitivity to steep SWA variation for TM polarization as compared to TE. Furthermore, with a comprehensive longitudinal scanning analysis for the TM polarization case, a feasible focus interval can be optimized to retrieve the steep SWA. As the proposed method is fast, highly sensitive and easy to implement, it provides a powerful approach to investigate the scattering behavior of nanostructures. @en

Accurate determination of the physical parameters of nanostructures from optical far-field scattering is an important and challenging topic in the semiconductor industry. Here, we propose a novel metrology method to determine simultaneously the height and side-wall angle of a step-shaped silicon nanostructure. By employing an optical singular beam into a typical coherent Fourier scatterometry system, both parameters can be retrieved through analyzing the intensity profile of the far-field scattering pattern. The use of singular beam is shown to be sensitive to slight changes of the parameters of the step. By changing the relative direction between the singularity and structure, the height and side-wall angle can both be retrieved with high precision. This new method is robust, simple, and can provide valuable means for micro-and-nano- metrologies.@en

Optical singularities indicate zero-intensity points in space where parameters, such as phase, polarization, are undetermined. Vortex beams such as the Laguerre–Gaussian modes are characterized by a phase factor eilθ, and contain a phase singularity in the middle of its beam. In the case of a transversal optical singularity (TOS), it occurs perpendicular to the propagation, and its phase integral is 2π in nature. Since it emerges within a nano-size range, one expects that TOSs could be sensitive in the light-matter interaction process and could provide a great possibility for accurate determination of certain parameters of nanostructure. Here, we propose to use TOSs generated by a three-wave interference to illuminate a step nanostructure. After interaction with the nanostructure, the TOS is scattered into the far field. The scattering direction can have a relation with the physical parameters of the nanostructure. We show that by monitoring the spatial coordinates of the scattered TOS, its propagation direction can be determined, and as consequence, certain physical parameters of the step nanostructure can be retrieved with high precision.@en

Single molecule detection and analysis play important roles in many current biomedical researches. The deep-nanoscale hotspots, being excited and confined in a plasmonic nanocavity, make it possible to simultaneously enhance the nonlinear light-matter interactions and molecular Raman scattering for label-free detections. Here, we theoretically show that a nanocavity formed in a tip-enhanced Raman scattering (TERS) system can also achieve valid optical trapping as well as TERS signal detection for a single molecule. In addition, the nonlinear responses of metallic tip and substrate film can change their intrinsic physical properties, leading to the modulation of the optical trapping force and the TERS signal. The results demonstrate a new degree of freedom brought by the nonlinearity for effectively modulating the optical trapping and Raman detection in single molecule level. This proposed platform also shows a great potential in various fields of research that need high-precision surface imaging.@en

In recent years, light beams containing phase or polarization singularities, such as optical vortices (OVs) and cylindrical vector beams (CVBs), have contributed to significant applications including optical orbital angular momentum (OAM) communications, particle trapping and manipulation, and super-resolved imaging. However, traditional methods for detecting the phase and polarization singularities of light suffer from drawbacks, such as large device size, complicated optics, and limits in detection function. Here, we propose an alternative method for detecting simultaneously phase and polarization singularities based on a spin-multiplexing metasurface. Both numerical and experimental results demonstrate that the metasurface device can be used to measure accurately the topological charge of OVs and the polarization order of CVBs individually or simultaneously, and exhibit beneficial attributes such as a broadband response, compactness, and system simplification. This method offers great potential in applications such as singular optical beam shaping and high-capacity OAM/CVB multiplexing communication.@en

In recent years, light beams containing phase or polarization singularities, such as optical vortices (OVs) and cylindrical vector beams (CVBs), have contributed to significant applications including optical orbital angular momentum (OAM) communications, particle trapping and manipulation, and super-resolved imaging. However, traditional methods for detecting the phase and polarization singularities of light suffer from drawbacks, such as large device size, complicated optics, and limits in detection function. Here, we propose an alternative method for detecting simultaneously phase and polarization singularities based on a spin-multiplexing metasurface. Both numerical and experimental results demonstrate that the metasurface device can be used to measure accurately the topological charge of OVs and the polarization order of CVBs individually or simultaneously, and exhibit beneficial attributes such as a broadband response, compactness, and system simplification. This method offers great potential in applications such as singular optical beam shaping and high-capacity OAM/CVB multiplexing communication.@en

With the increasing demand and limited production, China has to import a large amount of soybeans. However, soybean has been chosen as one target of the recent trade war between the US and China. It is therefore critical to assess the sustainability of soybean supply in China. Under such a circumstance, this study aims to fill such a research gap by using an emergy accounting approach from both spatial and temporal perspectives and at provincial-level. The impact of trade war on soybean imports and production is simulated by one GTAP (Global Trade Analysis Project) model. The results of Emergy Sustainability Indices (ESI) show that it is urgent to improve the sustainability of soybean planting in Heilongjiang, while Yunnan is the most appropriate place for planting soybean. For the international supply, the EER (Emergy Exchange Ratio) of China has decreased by 72% and the decrease of EERs at provincial level ranged from 59% to 86% during 2000–2015. The simulation results indicate the necessity of adjusting spatial structure of soybean planting and applying reasonable economic instruments to encourage sustainable soybean production.@en

With the increasing demand and limited production, China has to import a large amount of soybeans. However, soybean has been chosen as one target of the recent trade war between the US and China. It is therefore critical to assess the sustainability of soybean supply in China. Under such a circumstance, this study aims to fill such a research gap by using an emergy accounting approach from both spatial and temporal perspectives and at provincial-level. The impact of trade war on soybean imports and production is simulated by one GTAP (Global Trade Analysis Project) model. The results of Emergy Sustainability Indices (ESI) show that it is urgent to improve the sustainability of soybean planting in Heilongjiang, while Yunnan is the most appropriate place for planting soybean. For the international supply, the EER (Emergy Exchange Ratio) of China has decreased by 72% and the decrease of EERs at provincial level ranged from 59% to 86% during 2000–2015. The simulation results indicate the necessity of adjusting spatial structure of soybean planting and applying reasonable economic instruments to encourage sustainable soybean production.@en