This work presents the design and characterization of an analog-to-digital converter (ADC) with silicon carbide (SiC) for sensing applications in harsh environments. The SiC-based ADC is implemented with the state-of-the-art low-voltage SiC complementary-metal-oxide-semiconductor (CMOS) technology developed by Fraunhofer IISB. Two types of ADCs, i.e., a 4-bit flash ADC and a 6-bit successive-approximation (SAR) ADC, are designed and simulated up to 300 degrees Celsius. The measurement results show that the 4-bit SiC flash ADC can operate reliably up to at least 200 degrees Celsius, which outperforms the Si counterpart regarding the maximum operating temperature.@en

Integrated circuits based on wide bandgap semiconductors are considered an attractive option for meeting the demand for high-temperature electronics. Here, we report an analog-to-digital converter fabricated in a silicon carbide complementary metal-oxide-semiconductor technology now available through Europractice. The MOSFET component in this technology was measured up to 500 °C, and the key parameters, such as threshold voltage, field-effect mobility, and channel-length modulation parameters, were extracted. A 4-bit flash data converter, consisting of 266 transistors, is implemented with this technology and demonstrates correct operation up to 400 °C. Finally, the gate oxide quality is investigated by time-dependent dielectric breakdown measurements at 500 °C. A field-acceleration factor of 4.4 dec/(MV/cm) is obtained by applying the E model.@en