Advances in CMOS technologies and circuit techniques have led to the development of continuous-time delta-sigma modulators (CTΔ Σ Ms) that sample at gigahertz (GHz) frequencies and achieve high linearity [-100 dBc and >120 dBFS spurious-free dynamic ranges (SFDRs)] in wide bandwidths (>100 MHz). However, at low frequencies (≤ 10 MHz), their performance is limited by the 1/f noise generated by the near-minimum size devices used in their wide-bandwidth input stages. This, in turn, limits their use in radio receivers intended to cover both the AM and FM bands. In this work, a multi-path multi-frequency chopping scheme is proposed to suppress 1/f noise, while preserving interferer robustness, thermal noise levels, and linearity. Implemented in a CTΔ Σ analog-to-digital converter (ADC) sampling at 6 GHz, it achieves a 22× reduction in 1/f noise, as well as 122-dBFS SFDR and -98.3-dBc THD in a 120-MHz BW.

Advances in CMOS technologies have led to the development of continuous-time ΔΣ modulators (CTDSMs) with GHz sampling rates that achieve better than-100dBc linearity and bandwidths above 100MHz. However, at low frequencies (below 10MHz), their SNDR is limited by 1/f noise, which limits their use in radio receivers intended to cover both the AM and the FM bands. In this work, a multi-path multi-frequency chopping scheme is proposed to suppress 1/f noise, while maintaining interferer robustness, noise, spurious, and linearity performance. Implemented in a CTDSM sampling at 6GHz, it reduces its 1/f noise corner frequency by 22x and achieves -98.3dBc THD, 122dBFS SFDR in 120MHzBW.