Due to its immense potential to harvest larger amounts of energy from the wind at a higher capacity factor, offshore wind energy is the key to reach the goal of a more sustainable future. The wind energy research community has been focusing all its efforts to bring the new concept of floating offshore wind turbines (FOWT) into the market. By installing the turbine on top of a floating platform the restrictions of offshore turbines regarding the sea depth are lifted and numerous new sites now become available for the wind energy market.
Due to the motions that FOWT experience during their operation several questions arise regarding their aerodynamics, structural integrity and control efficiency. Since aerodynamic models are utilized in almost every field involved in the design of a wind farm, its particularly important to make sure that the current industrial aerodynamic codes, like BEM, are able to capture the unsteady aerodynamics of this complex system. High-fidelity CFD codes and experiments is the only way to truly assess the performance of BEM.
Surge motion is recognized by all authors as one of the most important motions imposed to FOWT. Thus, in the present thesis the impact of surge motion in the aerodynamics of FOWT was investigated by employing a high-fidelity blade-resolved CFD model in OpenFoam. After the extensive validation of the CFD model with the high-fidelity experiment of the UNAFLOW project, two test cases were examined. One with low surge frequency/amplitude which was employed to test whether momentum theory can accurately predict the induction of FOWT and one with an extreme surge frequency/amplitude which was used to test whether propeller and vortex ring states occur during the operation of FOWT - rendering BEM invalid.
In the first test case, Ferreira-Micallef induction computation model was utilized to extract the induction field from the CFD field data. After extensively comparing the induction computed by Ferreira-Micallef model and momentum theory it became apparent that due to the 2D nature of both models it was not possible to draw any significant conclusions about the accuracy of momentum theory. Specifically, due to the existence of 3D radial flow during the operation of FOWT Ferreira-Micallef model is not reliable and can not be used as a basis to compute the error of momentum theory. Having said that, in the mid-span region of the blade and when the FOWT is operating in the mild surge conditions, 3D flow was not present and a comparison of induction fields between momentum theory and Ferreira-Micallef model yielded very similar results. In the second extreme surge test case, two observations were made. First, even though thrust was acquiring negative values during the surge motion of the rotor, the stream-tube did not seem to experience any propeller state since it was expanding at all times. Second, in all the 3D iso-surface q-criterion scenes that were produced there was no large vortex ring visible in the wake, thus there was no indication that vortex ring state occurs for a FOWT surging under these harsh surge conditions.
The present thesis contributes in the better understanding of FOWT aerodynamics and provides clarity on the ambiguous research topic of whether propeller/vortex ring states occur during their operation. Furthermore, the high-fidelity blade-resolved CFD model which was developed can be used as a starting point for several future research efforts.