Resistor-based temperature sensors can achieve much higher resolution and energy efficiency than conventional BJT-based sensors [1], but they typically occupy more area (> 0.25 mm 2 ) and have lower operating temperatures (le 125 {circ} {C}) [2]-[4]. This work describes a 0.12mm 2 resistor-based sensor that uses a Wien-bridge (WB) filter to achieve 0.1 {circ} {C} (3 sigma) inaccuracy from - 40 {circ} {C} to 180 {circ} {C}. Compared to a state-of-the-art WB sensor [4], it occupies 6 × less area and achieves comparable relative accuracy over a 76% wider operating range. @en

This paper describes a low-power eddy current displacement sensor intended for safety-critical touch applications. A sensing inductor is incorporated into a digital PLL to efficiently digitize the displacement of a flexible metal foil. At a stand-off distance of 500μm, the sensor achieves 6.7nm resolution in a 3kHz bandwidth over a 43μm range. It consumes 200μW from a 1.8V supply, which represents a 35× improvement on the state of the art.@en