As the trend shifts toward the installation of larger foundation piles for offshore wind farms, which are associated with lower frequency excitations, accurately predicting the resulting sound and vibrations requires a precise characterization of soil behaviour and pile-soil interaction. In addition to noise emissions caused by pile installation, substrate-borne vibrations are particularly perceptible to various marine biota. Both seabed vibrations and underwater noise raise concerns about ecological impacts, emphasizing the need for predictive models that accurately represent the interactions between pile, soil, and seawater. This paper examines the effects of the inclusion of the pile-soil contact mechanism during impact pile driving both in the underwater soundand the seabed vibrations. The pile-soil mechanism condition is modelled by the introduction of linear springs at thepile-soil interface allowing for relative displacement to develop between the soil and the pile. A case study is conducted to explore the implications of the contact mechanism, focusing on the two key outputs: the noise levels in thesurrounding fluid and particle motion within the substrate. Sensitivity analysis is performed to evaluate how variations in contact conditions during impact piling influence these critical metrics.

The increasing size of offshore wind turbine foundations necessitates innovative approaches for monopile installation. Traditionally performed through impact driving, the challenges of large stresses induced on the monopile and high levels of underwater noise emissions have driven a shift toward vibratory installation methods. This study investigates the vibro-installation process of steel tubular piles in dense saturated sand through controlled lab-scale experiments. The experiments systematically varied penetration rates and driving frequencies to analyze the interaction between the piles and the surrounding soil. The results reveal critical insights into the influence of vibratory parameters on soil resistance and pile drivability, with a specific focus on the response of the pile tip and shaft under different conditions. These findings contribute to improved predictive models for monopile installation, addressing data gaps in offshore conditions and supporting the optimization of vibratory techniques for sustainable and cost-effective wind energy development.

Vibratory offshore pile driving offers a potential solution for reducing the underwater noise generated during the installation of foundation piles compared to using impact hammers. Existing noise prediction models are specifically tailored to impact pile driving scenarios. This paper introduces a novel methodology for underwater noise predictions during vibratory pile driving. A non-linear driveability model is utilised to derive realistic non-linear interface friction forces, which are then incorporated into a noise prediction model. The study emphasises the significance of integrating a driveability analysis, revealing substantial differences from traditional models that assume perfect contact between the pile and soil. The authors argue that the proposed model provides more realistic outcomes when considering smooth driving without refusal, in contrast to traditional models designed for impact piling. The results illustrate noticeable deviations in pressure levels and seabed vibrations between the linear and presented methods at the driving frequency and its superharmonics. Furthermore, the research demonstrates that the noise field is highly sensitive to variations in system dynamics and excitation spectrum during driving, using both small- and large-diameter monopiles as examples. This research contributes to developing more effective driving techniques to reduce underwater noise pollution and facilitate sustainable offshore wind turbine installations.

Periodic fluid-solid layered media exhibit distinctive features that can be utilized in various engineering disciplines, such as selective transmission of guided waves, omnidirectional band-gaps and Fano resonances, depending on the spatial configuration and the material properties of the fluid and solid layers involved. This work utilizes the Thin-Layer Method (TLM) in the study of layered fluid-solid media, by extending the original normal modes-based method to acousto-elastic problems. By means of this development, the band-gap structure of these periodic systems can be analysed and their effect when incorporated in fluid or solid full-/half-spaces can be investigated seamlessly for different periodic arrangements. Conclusively, this study presents a framework to analyse these systems, serving as a basis for non-local continuum theories, as well as unveiling desirable dispersion characteristics for the design of metamaterials.

The Gentle Driving of Piles (GDP) is a new technology for vibratory (mono)pile installation that is based on simultaneous application of low-frequency/axial and high-frequency/torsional vibrations. In this paper, a numerical modelling framework, that has been developed and successfully applied to axial vibratory driving, is employed to study GDP. In that manner, the major driving mechanism of this method is comprehended on the basis of field observations and numerical analyses. As regards the numerical model, the pile is described as a thin cylindrical shell and the soil medium is treated as a linear elastic layered half-space. The pile-soil coupling is realized via a history-dependent frictional interface, that accounts for friction force degradation due to the accumulation of loading cycles at the soil material points. The redirection of the friction force vector due to the high-frequency torsion manifests as the main driving mechanism of GDP. Finally, the soil disturbance during installation is compared for the cases of GDP and axial vibratory driving, showcasing the dissimilar characteristics of the induced soil motion.

This paper presents a new shaker design for the Gentle Driving of Piles method. Specifically, a lab-scale vibratory device has been developed that can simultaneously apply axial and torsional vibrations, both possessing frequency-amplitude decoupling. This design was implemented and tested in a lab-scale experimental campaign, where both pile and soil were extensively instrumented. The monitoring of the dynamic pile and soil behaviours during driving with various installation settings is of utmost importance to comprehend the governing mechanisms of the process. In that manner, the optimization of pile installation may be realized both for axial vibratory driving and GDP. In this work, the frequency-amplitude decoupling is pivotal, as it is showcased that both enhanced installation performance and reduced power consumption can be attained with proper selection of the installation settings and exploitation of high-frequency torsion.

This paper studies the mechanism that leads to the reduction of frictional soil reaction forces during pile driving, termed friction fatigue. We focus on axial vibratory driving, an environmentally friendly monopile installation method, and examine two friction fatigue formulations, i.e. a penetration-based and a cyclic memory mechanism. Friction fatigue plays a pivotal role in pile drivability and post-installation bearing capacity for piles installed via axial vibratory driving. Through numerical analyses and validation against field data from onshore experiments, the efficacy of these memory mechanisms is assessed. The results reveal that the proposed cyclic memory mechanism provides consistently more accurate predictions than the corresponding penetration-based approach, offering a promising option for modelling friction fatigue in vibratory driving. This study advances our understanding of friction fatigue in the context of vibratory driving for offshore monopile installation, emphasizing the need for further numerical and experimental works in this topic.

This paper presents the development and testing of a lab-scale Gentle Driving of Piles (GDP) shaker. Conventional impact piling for offshore monopile installation faces challenges due to noise regulations and its adverse marine environmental impacts. The GDP method, which integrates high-frequency torsional vibrations with low-frequency axial vibrations, aims to mitigate these issues. In this work, a new GDP shaker is designed and tested to enhance vibratory pile driving by independently controlling torsional and vertical vibration amplitudes and frequencies. Laboratory tests were conducted using the newly designed shaker for pile driving in sandy soil to evaluate its performance. The results indicate a significant reduction in power consumption and improved pile drivability with high-frequency, low-amplitude torsional vibrations. This study highlights the importance of optimizing dynamic inputs for enhanced pile penetration and reduced environmental impact, showcasing the potential of the GDP method as a promising alternative to traditional impact piling techniques.

Gentle Driving of Piles (GDP) is a new vibratory installation technology for tubular (mono)piles. It is characterized by the simultaneous application of low-frequency axial and high-frequency torsional vibrations, envisaged to achieve both high installation performance and reduced underwater noise emissions. The concept of GDP has been demonstrated experimentally in a medium-scale onshore field campaign, showcasing the potential of the method in terms of installation and post-installation performances. To further comprehend the mechanics of the GDP method, the driving process is studied by means of a novel pile–soil model; this framework has been recently developed and successfully applied to the problem of axial vibratory driving. In particular, the pile is treated as a thin cylindrical shell via a Semi-analytical Finite Element (SAFE) approach and a linear elastic layered soil half-space is considered via the Thin-Layer Method (TLM) coupled with Perfectly Matched Layers (PMLs). The pile–soil coupling is realized through a hereditary frictional interface and an elasto-plastic tip formulation, both characterized by standard geotechnical in-situ measurements. The comparison of numerical results with field data is favourable for drivability purposes, showcasing the potential of the numerical framework for the analysis of GDP. Conclusively, the mechanics of the installation process are deciphered and the redirection of the friction force vector – induced by high-frequency torsion – is identified as the main driving mechanism of GDP.

For offshore wind turbines (OWTs), the monopile comprises the most common type of foundation and vibratory driving is one of the main techniques for monopile installation (and decommissioning). In practice, prior to pile installation, a pile driving analysis is performed to select the appropriate installation device and the relevant settings. However, pile penetration results from a complicated vibrator-pile-soil interaction and better understanding of the latter is necessary for an efficient installation process. During the course of installation, the interface and boundary conditions of the pile continuously alter due to the soil layering and the non-linearity of the soil reaction. In this paper, a set of experimental data from an onshore experimental campaign are employed in a numerical scheme to identify the pile strain field based on in vacuo modes of simpler yet related systems. By mapping the pile strain field onto physically-based shape functions, the evolution of the soil reaction during pile installation can be studied, in order to facilitate the back-analysis of driving records and, by extension, improve pile drivability and vibro-acoustics predictions.

In this paper, the characteristics of the induced ground motion are studied for two pile installation methods. Specifically, the classical axial vibratory driving is compared with the Gentle Driving of Piles (GDP) method, to investigate the effect of high-frequency torsional excitation in the soil response. For that purpose, a non-linear 3-D axisymmetric pile-soil interaction model - benchmarked against field data for both methods - is used to perform the numerical study. The friction redirection mechanism, that is mobilized due to the torsional excitation in GDP, leads to a different wavefield in the soil medium compared to axial vibro-driving. In the latter only SV-P wave motions are elicited, whereas torsion introduces SH wave motions as well. For the numerical study, the model is comprised by a thin cylindrical shell coupled with a linear elastic layered half-space through a history-dependent frictional interface. The Thin-Layer Method (TLM) coupled with Perfectly Matched Layers (PMLs) is employed to accurately describe the wave motion in the soil medium. Comparisons in terms of the peak particle velocities (PPVs) and soil particle trajectories showcase significant motion reduction due to redirection of the soil friction forces, which elicits high-frequency SH waves and reduces the SV-P wave motion.

This paper presents a computationally efficient model for vibratory pile installation. A semi-analytical finite element (SAFE) model for thin cylindrical shells is derived to represent the pile. The linear dynamic response of the soil medium is described by means of Green's functions via the Thin-Layer Method (TLM) coupled with Perfectly Matched Layers (PMLs) to account for the underlying elastic half-space. Furthermore, the non-linear pile–soil interaction is addressed through a history-dependent frictional interface and a visco-elasto-plastic tip reaction model that can be characterized on the basis of standard geotechnical in-situ measurements. The solution to the non-linear dynamic pile–soil interaction problem is based on the sequential application of the Harmonic Balance Method (HBM). The constituent components of the model are first benchmarked against established numerical schemes. Subsequently, model predictions are compared with experimental data collected from field tests. It is demonstrated that the proposed model amalgamates rigorous theoretical elements and promising prediction capabilities in a computationally efficient framework, applicable to engineering practice.

Gentle driving of piles (GDP) is a new technology for the vibratory installation of tubular (mono) piles that aims to achieve both efficient installation and low noise emission by combining axial and torsional vibrations. To provide a preliminary demonstration of the GDP concept, onshore medium-scale tests in sand were performed in late 2019 at the Maasvlakte II site in Rotterdam (Netherlands). Several piles were installed using both impact and vibratory driving methods (including GDP), with the twofold aim of comparatively assessing (1) the effectiveness of GDP; and (2) the presence of installation effects in the pile response to lateral loading. This work focuses on the latter aspect and presents a quantitative analysis of the installation effects observed in the pile loading test data recorded in the field. Due to soil inhomogeneity across the field, a purely data-based analysis would have not supported objective conclusions, which led to adoption of an alternative approach based on one-dimensional (1D) numerical modeling. To this end, an advanced cyclic p-y model was calibrated for the simulation of the reference pile loading tests, and the values of key parameters were compared to infer quantitative information about relevant installation effects. The results presented herein inform about the promising performance of the GDP method, particularly in comparison to traditional impact hammering. Although the cyclic lateral pile behavior proves affected by the installation process, certain important aspects of installation effects gradually diminish as more loading cycles are applied.