Submarine channels deliver globally important volumes of sediments, nutrients, contaminants and organic carbon into the deep sea. Knickpoints are significant topographic features found within numerous submarine channels, which most likely play an important role in channel evolution and the behaviour of the submarine sediment-laden flows (turbidity currents) that traverse them. Although prior research has linked supercritical turbidity currents to the formation of both knickpoints and smaller crescentic bedforms, the relationship between flows and the dynamics of these seafloor features remains poorly constrained at field-scale. This study investigates the distribution, variation and interaction of knickpoints and crescentic bedforms along the 44 km long submarine channel system in Bute Inlet, British Columbia. Wavelet analyses on a series of repeated bathymetric surveys reveal that the floor of the submarine channel is composed of a series of knickpoints that have superimposed, higher-frequency, crescentic bedforms. Individual knickpoints are separated by hundreds to thousands of metres, with the smaller superimposed crescentic bedforms varying in wavelengths from ca 16 m to ca 128 m through the channel system. Knickpoint migration is driven by the passage of frequent turbidity currents, and acts to redistribute and reorganize the crescentic bedforms. Direct measurements of turbidity currents indicate the seafloor reorganization caused by knickpoint migration can modify the flow field and, in turn, control the location and morphometry of crescentic bedforms. A transect of sediment cores obtained across one of the knickpoints show sand–mud laminations of deposits with higher aggradation rates in regions just downstream of the knickpoint. The interactions between flows, knickpoints and bedforms that are documented here are important because they likely dominate the character of preserved submarine channel-bed deposits.

Turbidity currents transport prodigious volumes of sediment to the deep sea. But there are very few direct measurements from oceanic turbidity currents, ensuring they are poorly understood. Recent studies have used acoustic Doppler current profilers (ADCPs) to measure velocity profiles of turbidity currents. However, there were no detailed measurements of sediment concentration, which is a critical parameter because it provides the driving force and debate centers on whether flows are dilute or dense. Here we provide the most detailed measurements yet of sediment concentration in turbidity currents via a new method using dual-frequency acoustic backscatter ADCP data. Backscatter intensity depends on size and concentration of sediment, and we disentangle these effects. This approach is used to document the internal structure of turbidity currents in Congo Canyon. Flow duration is bimodal, and some flows last for 5–10 days. All flows are mainly dilute (<10 g/L), although faster flows contain a short-lived initial period of coarser-grained or higher-concentration flow within a few meters of the bed. The body of these flows tends toward a maximum speed of 0.8–1 m/s, which may indicate an equilibrium in which flow speeds suspend available sediment. Average sediment concentration and flow thickness determine the gravitational driving force, which we then compared to average velocities. This comparison suggests surprisingly low friction values, comparable to or less than those of major rivers. This new approach therefore provides fundamental insights into one of the major sediment transport processes on Earth.

Bypassing turbidity currents can travel downslope without depositing any of their suspended sediment load. Along the way, they may encounter a slope break (i.e. an abrupt decrease in slope angle) that initiates sediment deposition. Depending on the initiation point of deposition (the upslope pinch-out), these turbidite deposits in slope-break systems can form potential reservoirs for hydrocarbons. Here we investigate the distribution of turbidite deposits as a function of the geometry of slope-break systems in flume experiments. Shields-scaled turbidity currents were released into a flume tank containing an upper and a lower slope reach separated by a slope break. These slope-break experiments were generating both depositional and bypassing flows solely based on variation in steepness of the lower and upper slope. Results show that the depositional pattern in a slope-break system is controlled by the steepness of the upper and lower slope, rather than the angle of the slope break. The steepness of the upper slope controls the upslope pinch-out, while the lower slope controls the deposit thickness downstream of the slope break.

Rivers (on land) and turbidity currents (in the ocean) are the most important sediment transport processes on Earth. Yet how rivers generate turbidity currents as they enter the coastal ocean remains poorly understood. The current paradigm, based on laboratory experiments, is that turbidity currents are triggered when river plumes exceed a threshold sediment concentration of ~1 kg/m³. Here we present direct observations of an exceptionally dilute river plume, with sediment concentrations 1 order of magnitude below this threshold (0.07 kg/m³), which generated a fast (1.5 m/s), erosive, short-lived (6 min) turbidity current. However, no turbidity current occurred during subsequent river plumes. We infer that turbidity currents are generated when fine sediment, accumulating in a tidal turbidity maximum, is released during spring tide. This means that very dilute river plumes can generate turbidity currents more frequently and in a wider range of locations than previously thought.