High-fidelity and facile ex situ transmission electron microscopy (TEM) characterization of lithium−oxygen (Li−O₂) batteries is still limited by challenges in preserving the native environment of Li−O₂ discharge products. The extreme reactivity and moisture sensitivity of the discharge products means that they are quickly altered during sample retrieval from cycled batteries and transfer for TEM analysis, resulting in loss of original information. We here demonstrate that by using a TEM specimen grid directly in Li−O₂ batteries as both support electrode and sample collector overlaid on a standard oxygen diffusion electrode, discharge products that are formed on the grid can be kept pristine.

Temperature measurements of Li-ion batteries are important for assisting Battery Management Systems in controlling highly relevant states, such as State-of-Charge and State-of-Health. In addition, temperature measurements are essential to prevent dangerous situations and to maximize the performance and cycle life of batteries. However, due to thermal gradients, which might quickly develop during operation, fast and accurate temperature measurements can be rather challenging. For a proper selection of the temperature measurement method, aspects such as measurement range, accuracy, resolution, and costs of the method are important. After providing a brief overview of the working principle of Li-ion batteries, including the heat generation principles and possible consequences, this review gives a comprehensive overview of various temperature measurement methods that can be used for temperature indication of Li-ion batteries. At present, traditional temperature measurement methods, such as thermistors and thermocouples, are extensively used. Several recently introduced methods, such as impedance-based temperature indication and fiber Bragg-grating techniques, are under investigation in order to determine if those are suitable for large-scale introduction in sophisticated battery-powered applications.

Like all rechargeable battery systems, conventional Li-ion batteries (LIB) inevitably suffer from capacity losses during operation. This also holds for all-solid-state LIB. In this contribution an in operando neutron depth profiling method is developed to investigate the degradation mechanism of all-solid-state, thin film Si–Li₃PO₄–LiCoO₂ batteries. Important aspects of the long-term degradation mechanisms are elucidated. It is found that the capacity losses in these thin film batteries are mainly related to lithium immobilization in the solid-state electrolyte, starting to grow at the anode/electrolyte interface during initial charging. The Li-immobilization layer in the electrolyte is induced by silicon penetration from the anode into the solid-state electrolyte and continues to grow at a lower rate during subsequent cycling. X-ray photoelectron spectroscopy depth profiling and transmission electron microscopy analyses confirm the formation of such immobilization layer, which favorably functions as an ionic conductor for lithium ions. As a result of the immobilization process, the amount of free moveable lithium ions is reduced, leading to the pronounced storage capacity decay. Insights gained from this research shed interesting light on the degradation mechanisms of thin film, all-solid-state LIB and facilitate potential interfacial modifications which finally will lead to substantially improved battery performance.