This paper investigates the effects of three ageing factors (chemical, humidity, and temperature) and their interactions on the physical properties and degradation of silicone sealant used in microelectronic applications. The thermal degradation of silicone sealants was investigated by exposing samples to temperatures in the range of 150 up to 175 °C. Also, a set of samples were aged at 40 °C in a salt spray set-up with 100 % humidity in a salty atmosphere. Results showed detectable changes in the FTIR spectra of aged specimen as compared with the as-received sample. In all accelerated testing conditions, peak intensities decreased with ageing time, inferring that that the surface characteristics of the sealant is affected by ageing. Shear test results showed that with increasing the ageing time, the maximum shear stress in most cases has decreased in all ageing conditions. Also, it appears that samples with longer ageing times have experienced more elongation before failure. Results also show that salt spraying of specimens is associated with a decrease in the mechanical properties of the sealant, indicating the deleterious implications of ionic contaminations for the mechanical properties of samples.

This paper investigates the photocatalytic characteristics of Ag nanowire (AgNW)/TiO2 and AgNW/TiO2/graphene oxide (GO) nanocomposites. Samples were synthesized by the direct coating of TiO2 particles on the surface of silver nanowires. As-prepared AgNW/TiO2 and AgNW/TiO2/GO nanocomposites were characterized by electron microscopy, X-ray diffraction, UV/visible absorption spectroscopy, and infrared spectroscopy. Transmission electron microscope (TEM) images confirmed the successful deposition of TiO2 nanoparticles on the surface of AgNWs. The photocatalytic activity of synthesized nanocomposites was evaluated using Rhodamine B (RhB) in an aqueous solution as the model organic dye. Results showed that synthesized AgNW/TiO2/GO nanocomposite has superior photocatalytic activities when it comes to the decomposition of RhB.

This paper investigates the synthesis and characterization of photoactive TiO₂/CuO nanocomposites for the simultaneous antibacterial applications and photocatalytic removal of Amoxicilline from wastewaters. Effective removal of biological and organic contaminants from water resources has become a global challenge due to contaminants' complexity and extensive use. TiO₂/CuO heterojunctions with different CuO loadings were synthesized using a straightforward precipitation method. Electron microscopy, energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transformed infrared (FTIR), ultraviolet–visible (UV-VIS) analyses were used to characterize synthesized samples. Antibacterial activities of samples were investigated against Staphylococcus aureus. Also, the applicability of synthesized powders in the photocatalytic removal of Amoxicilline from wastewater was methodically investigated. Results showed that the photocatalytic activity of synthesized TiO₂/CuO nanocomposites is highly dependent on the CuO loadings of samples. CuO loading can also increase the light absorption within the visible light region, making TiO₂/CuO samples applicable in the visible light region. Results also showed that CuO loading greatly enhances the antibacterial characteristics of samples.