Accurate modelling of wind turbine wakes is critical for optimizing wind farm performance, but the complexity of wake interactions poses significant challenges. This study presents a two-phase blind test campaign, part of the Horizon Europe TWEET-IE project, designed to benchmark numerical models and investigate wake control strategies using wind tunnel experiments. Conducted with tandem wind turbine models at the Technical University of Munich and the National Technical University of Athens, the tests include inflow, load, power, and wake velocity measurements under controlled conditions. Phase I serves as an open-data benchmarking exercise for a baseline scenario without wake control, while Phase II introduces active individual blade pitch control to the upstream turbine, challenging participants to simulate advanced wake dynamics. This paper reviews Phase I results and details the experimental framework for Phase II, providing a foundation for advancing wake modelling and control in wind energy research.

Experimental results and complimentary computations for airfoils with vortex generators are compared in this paper, as part of an e_ort within the AVATAR project to develop tools for wind turbine blade control devices. Measurements from two airfoils equipped with passive vortex generators, a 30% thick DU97W300 and an 18% thick NTUA T18 have been used for benchmarking several simulation tools. These tools span low-to-high complexity, ranging from engineering-level integral boundary layer tools to fully-resolved computational uid dynamics codes. Results indicate that with appropriate calibration, engineering-type tools can capture the e_ects of vortex generators and outperform more complex tools. Fully resolved CFD comes at a much higher computational cost and does not necessarily capture the increased lift due to the VGs. However, in lieu of the limited experimental data available for calibration, high _delity tools are still required for assessing the e_ect of vortex generators on airfoil performance.

The flow around a wind turbine airfoil equipped with Vortex Generators (VGs) is examined. Predictions from three different Reynolds Averaged Navier Stokes (RANS) solvers with two different turbulence models and two different VG modelling approaches are compared between them and with experimental data. The best results are obtained with the more expensive fully resolved VG approach. The cost efficient BAY model can also provide acceptable results, if grid related numerical diffusion is minimized and only force coefficient polars are considered.