Optomechanical SiN nano-oscillators in high-finesse Fabry-Perot cavities can be used to investigate the interaction between mechanical and optical degree of freedom for ultra-sensitive metrology and fundamental quantum mechanical studies. In this paper, we present a nano-oscillator made of a high-stress round-shaped SiN membrane with an integrated on-chip 3-D acoustic shield properly designed to reduce mechanical losses. This oscillator works in the range of 200 kHz to 5 MHz and features a mechanical quality factor of Q ≃ 107 and a Q-frequency product in excess of 6.2 × 1012 Hz at room temperature, fulfilling the minimum requirement for quantum ground-state cooling of the oscillator in an optomechanical cavity. The device is obtained by MEMS deep reactive-ion etching (DRIE) bulk micromachining with a two-side silicon processing on a silicon-on-insulator wafer. The microfabrication process is quite flexible such that additional layers could be deposited over the SiN membrane before the DRIE steps, if required for a sensing application. Therefore, such oscillator is a promising candidate for quantum sensing applications in the context of the emerging field of quantum technologies. @en

We demonstrate the measurement of nanoparticle anisotropy by angularly resolved Rayleigh scattering of single optical levitated particles that are oriented in space via the trapping light in vacuum. This technique is applied to a range of particle geometries from perfect spherical nanodroplets to octahedral nanocrystals. We show that this method can resolve shape differences down to a few nanometers and be applied in both low-damping environments, as demonstrated here, and in traditional overdamped fluids used in optical tweezers. @en

We describe a method to control the cavity detuning in optomechanics experiments. This helps accurate measurements of the asymmetry in the motional sidebands, that testify the quantum behavior of the oscillator and quantifies its occupation number.@en