Emerging clean fuels with high octane rating make spark ignition (SI) technology a promising candidate for heavy-duty applications. The conversion of existing diesel engines to SI operation can accelerate the adoption of these fuels. This study investigates the combustion characteristics of a 500 kWe marine lean-burn (LB) homogeneous charge SI engine with a flat cylinder head and a hemispherical bowl-in piston. It focuses on the relationship between fuel distribution and phasing across the distinct bowl-in and squish combustion phases and their impact on efficiency and emissions in multicylinder engines. The effects of air excess ratio, spark timing, and intake air temperature are systematically assessed. Dedicated measurements of methane and total unburned hydrocarbon emissions enable a comprehensive evaluation of combustion performance and emissions. Results confirm the presence of a slower squish phase, differing from conventional SI engines, and highlight the influence of the squish region's surface-to-volume ratio on flame propagation. The sensitivity of combustion behavior to control parameters such as air excess ratio and ignition timing is demonstrated, with notable differences: while richer mixtures advance bowl-in and squish phases, earlier ignition timing delays the squish phase. Despite this, both mixture enrichment and ignition timing advancement improved performance, increasing brake thermal efficiency by 25% and 10%, respectively. Methane emissions remained within typical ranges for marine SI engines and NO_x emissions met Tier III limits at nominal conditions; yet the persistent challenge of methane slip underscores the need for more comprehensive regulatory standards addressing both CH₄ and NO_x emissions.

Renewably produced methanol is a promising fuel for internal combustion engines in long-range transportation thanks to its scalability, liquid storage, and favorable combustion properties. However, the distinction between different injection and ignition strategies for methanol engines and the resulting combustion mechanisms has not been consistently defined. Moreover, diffusion combustion strategies are favored over premixed strategies in large engines because of higher methanol energy fractions, disregarding the advantages of premixed approaches, such as reduced nitrogen oxide emissions and retrofitting opportunities. To address ambiguity in terminology, this paper proposes a classification framework for injection and ignition strategies and applies it to methanol-fueled internal combustion engines. Subsequently, this review focuses on experimental studies of methanol-fueled heavy-duty engines, which are crucial for transitioning to renewable and sustainable energy in long-range transportation. This research summarizes the impact of the reviewed injection and ignition strategies on combustion characteristics, engine performance and emissions to identify key trends. Furthermore, this review highlights how specific design and operating parameters influence premixed dual-fuel combustion, offering insights into optimizing performance and emissions. While mono-fuel and premixed dual-fuel strategies with methanol can significantly promote methanol use in heavy-duty engines and reduce harmful emissions like nitrogen oxides, a rise in unburned hydrocarbon emissions may also be expected, necessitating further research in this area. Additionally, methanol injection location in premixed dual-fuel schemes affects its cooling effect, influencing volumetric and thermal efficiency. Overall, this study deepens our understanding of methanol's impact on heavy-duty engine performance, highlighting critical challenges to be addressed for advancing sustainable transportation.

Spark-ignition (SI) engines emerge as a viable solution for specific marine applications, offering low-noise operation and emissions mitigation, as well as great potential to utilize high-octane number alternative fuels, such as methanol, ammonia, and hydrogen. However, heavy-duty (HD) SI engines still face challenges such as knocking and combustion instability. Particularly for lean combustion conditions, these engines exhibit the most pronounced cyclic combustion variations. This paper investigates the combustion stability of a 500 kW marine lean-burn natural-gas (NG) engine, a promising candidate for reducing emissions in marine applications. We focus on analyzing in-cylinder pressure measurements to quantify combustion characteristics, emphasizing cycle-to-cycle combustion variation, and exploring the influence of operating parameters like spark timing (ST) and air excess ratio (λ). Our findings demonstrate a clear trade-off between NO_x and COV_IMEP emissions through variations in the λ and ST. We identified a transition zone characterized by an increasing number of late-burning cycles at higher λ, before partial burning cycles began at further dilution. Following this, we established a new threshold of 6% for COV_IMEP to determine unstable combustion. Notably, increasing dilution from a λ of 1.12 to 1.61 decreased NO_x emissions from 17.83 g/kWh to 0.16 g/kWh, well below IMO Tier III standards, while COV_IMEP increased from 1.72% to 13.42%. These insights highlight the potential for advancing SI technology for marine applications and the need for further research to optimize both combustion and emissions in such engines.