GeoBIM, the integration of 3D geoinformation (Geo) with building information models (BIM), is a subject of increasing attention in both domains. A well-known practical challenge for this integration is the mixed state of software support for open standards in each domain that would ease the integration. This is often known by practitioners but poorly documented. In order to solve this problem, we devised the GeoBIM benchmark, in which we compile the experiences of volunteering participants, who perform a guided study to test the software they are most familiar with against a few provided datasets structured in open standards. The aim of the tests is to improve the knowledge of the state of the art in the software support for GeoBIM open standards and to identify points for improvement. In this paper, we present the design of the benchmark, especially explaining and discussing the chosen data to be used with their connected issues to be tested, and some initial results. ... Read more

It is widely acknowledged that the integration of BIM and GIS data is a crucial step forward for future 3D city modelling, but most of the research conducted so far has covered only the high-level and semantic aspects of GIS-BIM integration. This paper presents the results of the GeoBIM project, which tackled three integration problems focussing instead on aspects involving geometry processing: (i) the automated processing of complex architectural IFC models; (ii) the integration of existing GIS subsoil data in BIM; and (iii) the georeferencing of BIM models for their use in GIS software. All the problems have been studied using real world models and existing datasets made and used by practitioners in The Netherlands. For each problem, this paper exposes in detail the issues faced, proposed solutions, and recommendations for a more successful integration. ... Read more

GIS-data worden gebruikt om de leefomgeving te modelleren ten behoeve van
ruimtelijke analyses en BIM-data voor het ontwerp, het bouwen en het beheer
van bouwwerken. De grens tussen GIS en BIM vervaagt echter en er is een
groeiende vraag om beide typen data te integreren. ... Read more

Geographic information and building information modelling both model buildings and infrastructure, but the way in which they are modelled is usually complimentary and BIM-GIS integration is widely considered as a way forward for both domains. For one, more detailed BIM data can feed more general GIS data and GIS data can provide the context that is necessary to BIM data. While previous studies have focused on the theoretical aspects of such an integration at a schema level, in this paper we focus on explaining the geometric and topological issues we have found while trying to develop software to realise such an integration in practice and at a data level. In our preliminary results, which are presented here, we have found that many issues for such an integration remain: handling the geometric and topological problems in BIM models, dealing with bad georeferencing and figuring out the best way to convert data between IFC and CityGML are all open issues. ... Read more

Much work has already been done on how a 3D Cadastre should best be developed. An inclusive information model, the Land Administration Model (LADM ISO 19152) has been developed to provide an international framework for how this can best be done. This conceptual model does not prescribe the technical data format. One existing source from which data could be obtained is 3D Building Information Models (BIMs), or, more specifically in this context, BIMs in the form of one of buildingSMART’s open standards: the Industry Foundation Classes (IFC). The research followed a standard BIM methodology of first defining the requirements through the use of the Information Delivery Manual (IDM ISO29481) and then translating the process described in the IDM into technical requirements using a Model View Definition (MVD), a practice to coordinate upfront the multidisciplinary stakeholders of a construction project. The proposed process model illustrated how the time it takes to register 3D spatial units in a Land Registry could substantially be reduced compared to the first 3D registration in the Netherlands. The modelling of an MVD or a subset of the IFC data model helped enable the creation and exchange of boundary representations of topological objects capable of being combined into a 3D legal space overview map ... Read more